source: buchla-68k/include/patch.h@ e225e77

Last change on this file since e225e77 was 7258c6a, checked in by Thomas Lopatic <thomas@…>, 7 years ago

Use standard integer types.
  • Property mode set to 100644
File size: 4.9 KB
Line 
1/*
2 =============================================================================
3 patch.h -- MIDAS-VII Patch facility definitions
4 Version 22 -- 1988-12-02 -- D.N. Lynx Crowe
5 =============================================================================
6*/
7
8#define MAXPATCH 256 /* patch table size */
9#define RAWDEFS 256 /* def table size */
10
11#define NSLINES 1000 /* sequence table size */
12#define NSEQW 7 /* number of words in a seqent */
13
14#define SEQTIME 10 /* milliseconds per tick */
15
16#define DATAROW 9 /* data entry row */
17
18#define NDEFSTMS 5120 /* number of stms/defs */
19#define NPTEQELS 256 /* number of trigger fifo entries */
20
21#define NPTEQLO (NPTEQELS >> 2) /* trigger fifo lo water */
22#define NPTEQHI (NPTEQELS - NPTEQLO) /* trigger fifo hi water */
23
24#define NULL_DEF 0x1200 /* blank definer code */
25
26#define ADR_MASK 0x00FF /* patch / defent table index mask */
27#define TRG_MASK 0x1FFF /* trigger mask */
28#define PE_SPEC 0x00FF /* destination mask */
29#define PE_TBIT 0x8000 /* DEF triggered bit */
30
31/*
32
33*/
34
35/* Patch structure definitions */
36
37struct patch { /* patch table entry (16 bytes per entry) */
38
39 uint16_t nextstm; /* index of next entry in stm chain */
40 uint16_t prevstm; /* index of previous entry in stm chain */
41 uint16_t defnum; /* definer */
42 uint16_t stmnum; /* stimulus */
43 uint16_t paspec; /* destination type and flags */
44 uint16_t pasuba; /* sub-address */
45 uint16_t padat1; /* data word 1 */
46 uint16_t padat2; /* data word 2 */
47};
48
49struct defent { /* definition table entry -- 10 bytes per entry */
50
51 uint16_t nextdef; /* index of next in def chain */
52 uint16_t stm; /* stimulus */
53 uint16_t adspec; /* destination type */
54 uint16_t adsuba; /* sub-address */
55 uint16_t addat1; /* data word 1 */
56};
57
58
59/* Sequence structure definitions */
60
61struct seqent { /* sequence table entry -- 14 bytes per entry */
62
63 uint16_t seqtime; /* time */
64 uint16_t seqact1; /* action 1 */
65 uint16_t seqdat1; /* action 1 data */
66 uint16_t seqact2; /* action 2 */
67 uint16_t seqdat2; /* action 2 data */
68 uint16_t seqact3; /* action 3 */
69 uint16_t seqdat3; /* action 3 data */
70};
71
72/*
73
74*/
75
76/* Patch table references */
77
78#ifndef PATCHDEF
79extern int8_t stmptr[]; /* stimulus pointer table */
80extern int8_t defptr[]; /* definition pointer table */
81
82extern struct patch patches[]; /* patch table */
83
84extern struct defent defents[]; /* definition control table */
85#endif
86
87
88/* Sequence table references */
89
90#ifndef SEQDEFS
91extern struct seqent seqtab[]; /* sequence table */
92
93extern uint16_t seqflag[16]; /* sequence flags */
94extern uint16_t seqline[16]; /* sequence line */
95extern uint16_t seqstim[16]; /* sequence stimulus */
96extern uint16_t seqtime[16]; /* sequence timers */
97extern uint16_t sregval[16]; /* register values */
98extern uint16_t trstate[16]; /* trigger states */
99
100#endif
101
102/*
103
104*/
105
106/* Patch destination types */
107
108#define PA_KEY 1
109#define PA_TRG 2
110#define PA_PLS 3
111#define PA_LED 4
112#define PA_SLIN 5
113#define PA_SCTL 6
114#define PA_TUNE 7
115#define PA_RSET 8
116#define PA_RADD 9
117#define PA_INST 10
118#define PA_OSC 11
119#define PA_WAVA 12
120#define PA_WAVB 13
121#define PA_CNFG 14
122#define PA_LEVL 15
123#define PA_INDX 16
124#define PA_FREQ 17
125#define PA_FILT 18
126#define PA_FILQ 19
127#define PA_LOCN 20
128#define PA_DYNM 21
129#define PA_AUX 22
130#define PA_RATE 23
131#define PA_INTN 24
132#define PA_DPTH 25
133#define PA_VOUT 26
134
135/* Patch sub-address types */
136
137#define PSA_SRC 0
138#define PSA_MLT 1
139#define PSA_TIM 2
140#define PSA_VAL 3
141#define PSA_FNC 4
142
143/* Patch oscillator data types */
144
145#define PSO_INT 0
146#define PSO_RAT 1
147#define PSO_FRQ 2
148#define PSO_PCH 3
149
150/*
151
152*/
153
154/* Sequence control flags */
155
156#define SQF_RUN 0x8000 /* RUN state */
157#define SQF_CLK 0x4000 /* CLK state */
158
159/* Sequence action word masks */
160
161#define SQ_MACT 0x00FF /* ACT -- action mask */
162#define SQ_MOBJ 0xFF00 /* ACT -- object mask */
163
164/* Sequence action types */
165
166#define SQ_NULL 0x0000 /* NULL action */
167
168#define SQ_CKEY 0x0001 /* Key closure */
169#define SQ_RKEY 0x0002 /* Key release */
170#define SQ_TKEY 0x0003 /* Key transient */
171#define SQ_IKEY 0x0004 /* If key active */
172
173#define SQ_STRG 0x0005 /* Trigger on */
174#define SQ_CTRG 0x0006 /* Trigger off */
175#define SQ_TTRG 0x0007 /* Trigger toggle */
176#define SQ_ITRG 0x0008 /* If trigger active */
177
178#define SQ_SREG 0x0009 /* Set register */
179#define SQ_IREQ 0x000A /* If register = */
180#define SQ_IRLT 0x000B /* If register < */
181#define SQ_IRGT 0x000C /* If register > */
182
183#define SQ_ISTM 0x000D /* If stimulus active */
184#define SQ_JUMP 0x000E /* Jump to sequence line */
185#define SQ_STOP 0x000F /* Stop sequence */
186
187#define SQ_AREG 0x0010 /* Increment register */
188
189/* Sequence data word masks */
190
191#define SQ_MFLG 0xF000 /* DAT -- flag mask */
192#define SQ_MTYP 0x0F00 /* DAT -- data type mask */
193#define SQ_MVAL 0x00FF /* DAT -- data value mask */
194
195/* Sequence data types */
196
197#define SQ_REG 0x0000 /* register */
198#define SQ_VAL 0x0100 /* value */
199#define SQ_VLT 0x0200 /* voltage */
200#define SQ_RND 0x0300 /* random */
Note: See TracBrowser for help on using the repository browser.