source: buchla-68k/orig/DOC/SCANARGS.TXT@ f806726

SCANARGS(3)         UNIX Programmer's Manual          SCANARGS(3)



NAME
     scanargs, qscanargs - formatted conversion from command
     argument list

SYNOPSIS
     #include <stdio.h>

     scanargs(argc, argv, format [, pointer]...  )
     int argc;
     char *argv[];
     char *format;

DESCRIPTION
     Scanargs reads argc arguments from an argument list pointed
     to by argv. It converts the argument list according to the
     format string, and stores the results of the conversions in
     its parameters.  Qscanargs is a smaller and less powerful
     version which does not understand floating point.

     Scanargs expects as its parameters an argument count argc, a
     pointer to an argument list argv (see exec(2)), a control
     string format, described below, and a set of pointer argu-
     ments indicating where the converted output should be
     stored.

     The control string contains specifications, which are used
     to direct interpretation of argument sequences.  It contains
     the necessary information to describe an acceptable syntax
     for the argument list, and the expected meaning of each
     argument.

     If the scanning fails it will print a cryptic message tel-
     ling why it failed, and generate a usage message from the
     control string.

     The control string is composed of two parts:

     Name:   The first characters in the string are assumed to be
     the calling name of the program being executed. This is used
     for generation of usage messages, but is otherwise ignored.
     If this field is a % sign, it is replaced with the contents
     of argv[0] in the message.

     Conversions:   Following the name, an optional list of
     conversion specifications is given, with separating spaces.
     The structure of a conversion specification:

          label_key_conversion

     consists of a label which is a string of non-space charac-
     ters describing the acceptable argument, a key which may be
     either of



Printed 10/6/84            AMPEX CORP.                          1






SCANARGS(3)         UNIX Programmer's Manual          SCANARGS(3)



     %   The argument is optional. Its absence is ignored.

     !   A required argument. If absent, an error return ensues.

     and a conversion character which indicates the interpreta-
     tion of the argument; the corresponding pointer parameter
     must be of a restricted type.

     The following conversion characters are supported:

     d D a decimal integer is expected; the corresponding parame-
         ter should be an int or a long (if D is specified)
         pointer.

     o O an octal integer is expected; the corresponding parame-
         ter should be an int or a long pointer.

     x X a hexadecimal integer is expected; the corresponding
         parameter should be an int or a long pointer.

     n N an integer numeric conversion using C language syntax.
         Numbers beginning 0x are hexadecimal, numbers beginning
         0 are octal, and other numbers are decimal.  Negative
         hex numbers must have the minus sign following the 0x,
         i.e. negative 0xa would be given as 0x-a.  The
         corresponding pointer should point to an int or a long.

     f F a floating point number is expected; the corresponding
         parameter should be a pointer to a float or a double.
         Not available in qscanargs.

     x X d D o O f F
         all numeric types supported by scanf(3S) are legal in
         scanargs; qscanargs supports all but f and F formats,
         and avoids including the large size of the scanf rou-
         tine.

     s   a character string is expected; the corresponding param-
         eter should be the address of a pointer to char.

     -   a single character flag is expected; the corresponding
         parameter should be an int pointer.  The occurrence of a
         - followed by the character specified in the label will
         cause the setting of the least significant bit of the
         integer pointed to by the corresponding parameter.  The
         label may consist of up to sixteen (32 on a VAX) option
         characters, in which case one of the bits of the integer
         is independantly set to reflect which one of the flags
         was present. (The right most character corresponds to
         the LSB of the integer)  Only one option may be chosen
         from each conversion specification.  The bits which are
         not set will remain in their previous state.  For



Printed 10/6/84            AMPEX CORP.                          2






SCANARGS(3)         UNIX Programmer's Manual          SCANARGS(3)



         example, a specification of abc%- would match one of -a
         -b or -c in the argument list. -c would cause the
         corresponding variable to be set to 1, -b to 2, and -a
         to 4.  (Actually, these bits would be ored in, but
         assuming an intial value of 0, this is true).

         The - may be followed immediately by more
         label_key_conversion specifications.  These should not
         be separated by blanks and should not contain any -
         specifications.  They will be processed only if the flag
         argument is scanned.  This allows optional specification
         of parameters corresponding to a flag (e.g.  -f file ).
         Corresponding arguments on the command line must appear
         between the flag which introduces them and the next flag
         in the command line.

     $   This may appear only as the last specifier in the format
         string, and is used to "eat up" the rest of the command
         arguments.  The corresponding function argument is an
         int pointer.  An index into argv to the dividing point
         between the arguments which have been used, and those
         which have not is returned.  This index points to the
         first unused command argument.  If there is no such
         dividing point, an error will be generated.

     A string or numeric conversion character may be preceded by
     a * or a , to indicate that a list of such arguments is
     expected.  If , is used, then the AT&T proposed argument
     standard is followed, and a single string is expected, with
     the individual list elements separated by commas or spaces.
     Two commas in a row will produce a null entry (0 if numeric,
     zero-length string if string conversion), but multiple
     spaces, and spaces following a comma, are taken as a single
     separator.  If * is specified, then multiple arguments are
     parsed to produce the list.  A format specifier with a * or
     a , takes two arguments.  The first is an int pointer, the
     number of items in the list is returned here.  The second is
     a pointer to pointer to the correct data type for the format
     specifier.  A pointer to the list of arguments is returned
     here.

     The scanner will process the control string from left to
     right, and where there are multiple conversions of the same
     type, they will be assigned one to one with their order of
     occurrence in the argument list.  Where the order of the
     arguments is not ambiguous in the control string, they may
     occur in any order in the argument list. (ie. A decimal
     number will not be confused with a flag, but may be confused
     with an octal number or another decimal number. So if an
     octal and a decimal number are to be arguments, their order
     will determine their conversion, while a decimal number and
     a flag as arguments may occur in any order and still be



Printed 10/6/84            AMPEX CORP.                          3






SCANARGS(3)         UNIX Programmer's Manual          SCANARGS(3)



     converted correctly.)

     An argument list that does not match the requirements of the
     control string will cause the printing of a short message
     telling why, and a message telling what the correct usage
     is.  This usage is gleaned from the control string, and the
     labels are used directly.  The labels should be both terse
     and descriptive!  Spaces, tabs, and newlines in the format
     string will be reproduced in the usage message, and can be
     used for effective prettyprinting.  A single tab (following
     a newline) will indent the line directly under the command
     name in the usage message.

     The scanargs function returns 1 when the argument list
     matched the requirements of the control string, and returns
     0 if there was a failure.  Parameters for any conversions
     not matched are left untouched.
     For example, the call

          int i; double x; char *name;
          scanargs(argc, argv, "program decimal%d floating%F
          file%s"
               , &i, &x, &name );

     in a C program executed by the shell command

          % program 10 3.5397 inputfile

     will assign to i the value 10, x the value 3.5397, and name
     will point to the string "inputfile".

     If the program was executed by the shell command

          % program  3.4 .7 inputfile

     the following would be printed on the standard error:

          extra arguments not processed
          usage : program [decimal] [floating] [file]

     because 3.4 matches the type of 'floating' and inputfile
     matches the type of 'file', leaving .7 unmatched (it is con-
     sidered a string by scanargs, to be considered a number, it
     must begin with a digit).

     Finally, executing the command
          % program 10
     would assign 10 to i, leaving x and name unaffected.

     This call could be used for the diff(1) command





Printed 10/6/84            AMPEX CORP.                          4






SCANARGS(3)         UNIX Programmer's Manual          SCANARGS(3)



          int blanks; int flags; char *file1; char *file2;
          scanargs(argc, argv, "diff b%- efh%- file1!s file2!s"
               , &blanks, &flags, &file1, &file2 );

     and would only allow one of either -e -f or -h to be chosen
     optionally, with -b as an independent option.  File1 and
     file2 are both required.  The usage message for this version
     of diff would be

          usage : diff [-b] -{efh} file1 file2

     This call could be used for a simplified version of the
     sed(1) command

          int efile; int noprint; char *script; char *file1; char
          *file2;
          scanargs(argc, argv, "sed n%- script%s f%-editfile!s
          file%s"
               , &noprint, &script, &efile, &file1, &file2 );

     If the -f option is specified, then a file name must be
     given as the next string argument.  The usage message for
     this version of sed would be

          usage : sed [-n] [script] [-f editfile] file


     Further notes on putting together a format string:

     It is still possible for conditional arguments to be con-
     fused with arguments which stand alone.  For this reason, it
     is recommended that all flags (and associated conditional
     arguments) be specified first in the scanargs format string.
     This ordering is not necessary for the command line argu-
     ments, however.  The only case which could still cause con-
     fusion if these rules are followed is illustrated below:
          format string: "prog d%-num%d othernum%d"
          command line:  prog -d 9
     It is unclear whether the number 9 should be associated with
     the num parameter or the othernum parameter. Scanargs
     assigns it to the num parameter.  To force it to be associ-
     ated with othernum the command could be invoked as either
                    prog 9 -d
          or        prog -d -- 9
     The -- in the second example is interpreted as a flag,
     thereby terminating the scan for arguments introduced by the
     -d.  According to the proposed standard, an argument of --
     is to be interpreted as terminating the optional arguments
     on a flag.

     Note that if the format string in the above example were
                    "prog othernum%d d%-num%d"



Printed 10/6/84            AMPEX CORP.                          5






SCANARGS(3)         UNIX Programmer's Manual          SCANARGS(3)



     it would be impossible to assign a value to num without also
     assigning a value to othernum.


SEE ALSO
     exec(2), scanf(3S)

DIAGNOSTICS
     Returns 0 on error, 1 on success.

AUTHOR
     Gary Newman - Ampex Corporation
     Spencer W. Thomas - University of Utah

BUGS
     By its nature a call to scanargs defines a syntax which may
     be ambiguous, and although the results may be surprising,
     they are quite predictable.  The heuristic used to tell
     string arguments from numeric arguments is just that.  In
     fact, that you can't give a number as a string argument is
     sort of bogus.


































Printed 10/6/84            AMPEX CORP.                          6