[f40a309] | 1 | /*
|
---|
| 2 | =============================================================================
|
---|
| 3 | barbadj.c -- MIDAS-VII -- GLC bar graph drivers
|
---|
| 4 | Version 8 -- 1988-10-27 -- D.N. Lynx Crowe
|
---|
| 5 |
|
---|
| 6 | BarBadj(bar, val)
|
---|
| 7 | short bar, val;
|
---|
| 8 |
|
---|
| 9 | Adjusts a bottom-zero bar graph, 'bar',
|
---|
| 10 | to read 'val'.
|
---|
| 11 |
|
---|
| 12 | BarBset(bar, val)
|
---|
| 13 | short bar, val;
|
---|
| 14 |
|
---|
| 15 | Sets a bottom-zero bar graph, 'bar',
|
---|
| 16 | to an intial value, 'val'.
|
---|
| 17 |
|
---|
| 18 | BarCadj(bar, val)
|
---|
| 19 | short bar, val;
|
---|
| 20 |
|
---|
| 21 | Adjusts a centered-zero bar graph, 'bar',
|
---|
| 22 | to read 'val'.
|
---|
| 23 |
|
---|
| 24 | BarCset(bar, val)
|
---|
| 25 | short bar, val;
|
---|
| 26 |
|
---|
| 27 | Sets a centered-zero bar graph, 'bar',
|
---|
| 28 | to an intial value, 'val'.
|
---|
| 29 | =============================================================================
|
---|
| 30 | */
|
---|
| 31 |
|
---|
| 32 | #include "stddefs.h"
|
---|
| 33 | #include "hwdefs.h"
|
---|
| 34 | #include "glcfns.h"
|
---|
| 35 | #include "glcdefs.h"
|
---|
| 36 |
|
---|
| 37 | extern short BarBcur[];
|
---|
| 38 | extern short BarCcur[];
|
---|
| 39 |
|
---|
| 40 | /* left-most bar columns */
|
---|
| 41 |
|
---|
| 42 | short BarCols[14] = { 2, 8, 14, 20, 26, 32, 38, 44, 50, 56, 62, 68, 74, 80 };
|
---|
| 43 |
|
---|
| 44 | /* bar dot data */
|
---|
| 45 |
|
---|
| 46 | short BarDots[3] = { 0x1C, 0xFC, 0xE0 };
|
---|
| 47 |
|
---|
| 48 | #include "glcbars.h" /* bar graph driver constant definitions */
|
---|
| 49 |
|
---|
| 50 | /* |
---|
| 51 |
|
---|
| 52 | */
|
---|
| 53 |
|
---|
| 54 | /*
|
---|
| 55 | =============================================================================
|
---|
| 56 | BarBadj() -- adjust a bottom-zero bar graph to a new value
|
---|
| 57 | =============================================================================
|
---|
| 58 | */
|
---|
[0580615] | 59 |
|
---|
[f40a309] | 60 | void BarBadj(short bar, short val)
|
---|
| 61 | {
|
---|
| 62 | register short bardot, barpos, curdif;
|
---|
| 63 | register unsigned baradr;
|
---|
| 64 | short barcol, bardif, curbar, i, newbar;
|
---|
| 65 |
|
---|
| 66 | newbar = BarBLn[val]; /* look up the new bar position */
|
---|
| 67 | curbar = BarBcur[bar]; /* get the current bar position */
|
---|
| 68 | bardif = newbar - curbar; /* calculate how far to move the bar */
|
---|
| 69 |
|
---|
| 70 | if (0 EQ bardif) /* done if bar doesn't need to be moved */
|
---|
| 71 | return;
|
---|
| 72 |
|
---|
| 73 | GLCcurs(G_ON); /* turn on GLC cursor to enable writing */
|
---|
| 74 | barcol = BarCols[bar]; /* find leftmost column of bar */
|
---|
| 75 |
|
---|
| 76 | if (bardif > 0) { /* increasing value */
|
---|
| 77 |
|
---|
| 78 | /* calculate initial GLC RAM write address */
|
---|
| 79 |
|
---|
| 80 | baradr = barcol + (85 * (63 - (curbar + 1))) + G_PLANE2;
|
---|
| 81 |
|
---|
| 82 | LCD_WC = G_CRSMUP; /* set cursor motion "up" */
|
---|
| 83 |
|
---|
| 84 | for (i = 0; i < 3; i++) { /* for each bar column ... */
|
---|
| 85 |
|
---|
| 86 | curdif = bardif; /* set difference counter */
|
---|
| 87 | bardot = BarDots[i]; /* get the column dot value */
|
---|
| 88 |
|
---|
| 89 | LCD_WC = G_CRSWR; /* set cursor address */
|
---|
| 90 | LCD_WD = baradr & 0xFF;
|
---|
| 91 | LCD_WD = (baradr >> 8) & 0xFF;
|
---|
| 92 |
|
---|
| 93 | ++baradr; /* update GLC start address */
|
---|
| 94 |
|
---|
| 95 | LCD_WC = G_MWRITE; /* setup to write */
|
---|
| 96 |
|
---|
| 97 | while (curdif--) /* write new dots */
|
---|
| 98 | LCD_WD = bardot;
|
---|
| 99 | }
|
---|
| 100 | /* |
---|
| 101 |
|
---|
| 102 | */
|
---|
| 103 | } else { /* decreasing value */
|
---|
| 104 |
|
---|
| 105 | /* calculate initial GLC RAM write address */
|
---|
| 106 |
|
---|
| 107 | baradr = barcol + (85 * (63 - curbar)) + G_PLANE2;
|
---|
| 108 |
|
---|
| 109 | LCD_WC = G_CRSMDN; /* set cursor motion "down" */
|
---|
| 110 |
|
---|
| 111 | for (i = 0; i < 3; i++) { /* for each bar column ... */
|
---|
| 112 |
|
---|
| 113 | curdif = -bardif; /* set difference counter */
|
---|
| 114 |
|
---|
| 115 | LCD_WC = G_CRSWR; /* set cursor address */
|
---|
| 116 | LCD_WD = baradr & 0xFF;
|
---|
| 117 | LCD_WD = (baradr >> 8) & 0xFF;
|
---|
| 118 |
|
---|
| 119 | ++baradr; /* update GLC start address */
|
---|
| 120 |
|
---|
| 121 | LCD_WC = G_MWRITE; /* setup to write */
|
---|
| 122 |
|
---|
| 123 | while (curdif--) /* erase old dots */
|
---|
| 124 | LCD_WD = 0x00;
|
---|
| 125 | }
|
---|
| 126 | }
|
---|
| 127 |
|
---|
| 128 | LCD_WC = G_CRSMRT; /* set cursor motion = "right" */
|
---|
| 129 | GLCcurs(G_OFF); /* turn off the cursor */
|
---|
| 130 |
|
---|
| 131 | BarBcur[bar] = newbar; /* update current bar position */
|
---|
| 132 | }
|
---|
| 133 |
|
---|
| 134 | /* |
---|
| 135 |
|
---|
| 136 | */
|
---|
| 137 |
|
---|
| 138 | /*
|
---|
| 139 | =============================================================================
|
---|
| 140 | BarBset() -- set a bottom-zero bar graph to an initial value
|
---|
[0580615] | 141 | =============================================================================
|
---|
[f40a309] | 142 | */
|
---|
| 143 |
|
---|
| 144 | void BarBset(short bar, short val)
|
---|
| 145 | {
|
---|
| 146 | register short bardot, barpos, newbar;
|
---|
| 147 | register unsigned baradr;
|
---|
| 148 | short barcol, i;
|
---|
| 149 |
|
---|
| 150 | newbar = BarBLn[val]; /* look up the new bar position */
|
---|
| 151 | barcol = BarCols[bar]; /* find leftmost column of bar */
|
---|
| 152 |
|
---|
| 153 | GLCcurs(G_ON); /* turn on GLC cursor to enable writing */
|
---|
| 154 |
|
---|
| 155 | /* calculate initial GLC RAM write address */
|
---|
| 156 |
|
---|
| 157 | baradr = barcol + (85 * (63 - BBase)) + G_PLANE2;
|
---|
| 158 |
|
---|
| 159 | LCD_WC = G_CRSMUP; /* set cursor motion = "up" */
|
---|
| 160 |
|
---|
| 161 | for (i = 0; i < 3; i++) { /* for each bar column ... */
|
---|
| 162 |
|
---|
| 163 | bardot = BarDots[i]; /* get the column dot value */
|
---|
| 164 | barpos = BBase; /* get base of bar */
|
---|
| 165 |
|
---|
| 166 | LCD_WC = G_CRSWR; /* set cursor address */
|
---|
| 167 | LCD_WD = baradr & 0xFF;
|
---|
| 168 | LCD_WD = (baradr >> 8) & 0xFF;
|
---|
| 169 |
|
---|
| 170 | ++baradr; /* update GLC start address */
|
---|
| 171 |
|
---|
| 172 | LCD_WC = G_MWRITE; /* setup to write */
|
---|
| 173 |
|
---|
| 174 | while (barpos++ LE newbar) /* write new dots */
|
---|
| 175 | LCD_WD = bardot;
|
---|
| 176 |
|
---|
| 177 | while (barpos++ < BTop) /* erase old dots */
|
---|
| 178 | LCD_WD = 0x00;
|
---|
| 179 | }
|
---|
| 180 |
|
---|
| 181 | LCD_WC = G_CRSMRT; /* set cursor motion = "right" */
|
---|
| 182 | GLCcurs(G_OFF); /* turn off the cursor */
|
---|
| 183 |
|
---|
| 184 | BarBcur[bar] = newbar; /* update current bar position */
|
---|
| 185 | }
|
---|
| 186 |
|
---|
| 187 | /* |
---|
| 188 |
|
---|
| 189 | */
|
---|
| 190 |
|
---|
| 191 | /*
|
---|
| 192 | =============================================================================
|
---|
[0580615] | 193 | BarCadj() -- adjust a centered-zero bar graph to a new value
|
---|
[f40a309] | 194 | =============================================================================
|
---|
| 195 | */
|
---|
| 196 |
|
---|
| 197 | void BarCadj(short bar, short val)
|
---|
| 198 | {
|
---|
| 199 | register short bardot, barpos, newbar;
|
---|
| 200 | register unsigned baradr;
|
---|
| 201 | short barcol, bardif, curbar, i;
|
---|
| 202 |
|
---|
| 203 | newbar = BarCLn[val + BOffset]; /* look up the new bar position */
|
---|
| 204 | curbar = BarCcur[bar]; /* get the current bar position */
|
---|
| 205 | bardif = newbar - curbar; /* calculate how far to move the bar */
|
---|
| 206 |
|
---|
| 207 | if (0 EQ bardif) /* done if bar doesn't need to be moved */
|
---|
| 208 | return;
|
---|
| 209 |
|
---|
| 210 | GLCcurs(G_ON); /* turn on GLC cursor to enable writing */
|
---|
| 211 |
|
---|
| 212 | barcol = BarCols[bar]; /* find leftmost column of bar */
|
---|
| 213 |
|
---|
| 214 | /* calculate initial GLC RAM write address */
|
---|
| 215 |
|
---|
| 216 | baradr = barcol + (85 * (63 - curbar)) + G_PLANE2;
|
---|
| 217 |
|
---|
| 218 | /* |
---|
| 219 |
|
---|
| 220 | */
|
---|
| 221 | if (newbar > curbar) { /* increasing value */
|
---|
| 222 |
|
---|
| 223 | LCD_WC = G_CRSMUP; /* set cursor motion "up" */
|
---|
| 224 |
|
---|
| 225 | for (i = 0; i < 3; i++) { /* for each bar column ... */
|
---|
| 226 |
|
---|
| 227 | bardot = BarDots[i]; /* get the column dot value */
|
---|
| 228 | barpos = curbar; /* set current vert. position */
|
---|
| 229 |
|
---|
| 230 | LCD_WC = G_CRSWR; /* set cursor address */
|
---|
| 231 | LCD_WD = baradr & 0xFF;
|
---|
| 232 | LCD_WD = (baradr >> 8) & 0xFF;
|
---|
| 233 |
|
---|
| 234 | LCD_WC = G_MWRITE; /* setup to write */
|
---|
| 235 |
|
---|
| 236 | while (barpos NE newbar) /* write bar on LCD */
|
---|
| 237 | if (barpos++ < BCenter)
|
---|
| 238 | LCD_WD = 0x00; /* dots off */
|
---|
| 239 | else
|
---|
| 240 | LCD_WD = bardot; /* dots on */
|
---|
| 241 |
|
---|
| 242 | ++baradr; /* update GLC start address */
|
---|
| 243 | }
|
---|
| 244 | /* |
---|
| 245 |
|
---|
| 246 | */
|
---|
| 247 | } else { /* decreasing value */
|
---|
| 248 |
|
---|
| 249 | LCD_WC = G_CRSMDN; /* set cursor motion "down" */
|
---|
| 250 |
|
---|
| 251 | for (i = 0; i < 3; i++) { /* for each bar column ... */
|
---|
| 252 |
|
---|
| 253 | bardot = BarDots[i]; /* get column dot value */
|
---|
| 254 | barpos = curbar; /* set current bar location */
|
---|
| 255 |
|
---|
| 256 | LCD_WC = G_CRSWR; /* set cursor address */
|
---|
| 257 | LCD_WD = baradr & 0xFF;
|
---|
| 258 | LCD_WD = (baradr >> 8) & 0xFF;
|
---|
| 259 |
|
---|
| 260 | LCD_WC = G_MWRITE; /* setup to write */
|
---|
| 261 |
|
---|
| 262 | while (barpos NE newbar) /* write bar to LCD */
|
---|
| 263 | if (barpos-- > BCenter)
|
---|
| 264 | LCD_WD= 0x00; /* dots off */
|
---|
| 265 | else
|
---|
| 266 | LCD_WD = bardot; /* dots on */
|
---|
| 267 |
|
---|
| 268 | ++baradr; /* update GLC start address */
|
---|
| 269 | }
|
---|
| 270 | }
|
---|
| 271 |
|
---|
| 272 | LCD_WC = G_CRSMRT; /* set cursor motion = "right" */
|
---|
| 273 | GLCcurs(G_OFF); /* turn off the cursor */
|
---|
| 274 |
|
---|
| 275 | BarCcur[bar] = newbar; /* update current bar position */
|
---|
| 276 | }
|
---|
| 277 |
|
---|
| 278 | /* |
---|
| 279 |
|
---|
| 280 | */
|
---|
[0580615] | 281 |
|
---|
[f40a309] | 282 | /*
|
---|
| 283 | =============================================================================
|
---|
| 284 | BarCset() -- set a centered-zero bar graph to an initial value
|
---|
| 285 | =============================================================================
|
---|
| 286 | */
|
---|
| 287 |
|
---|
| 288 | void BarCset(short bar, short val)
|
---|
| 289 | {
|
---|
| 290 | register short bardot, barpos, barloc1, barloc2;
|
---|
| 291 | register unsigned baradr;
|
---|
| 292 | short barcol, i, newbar;
|
---|
| 293 |
|
---|
| 294 | GLCcurs(G_ON); /* turn on GLC cursor to enable writing */
|
---|
| 295 |
|
---|
| 296 | newbar = BarCLn[val + BOffset]; /* look up the new bar position */
|
---|
| 297 | barcol = BarCols[bar]; /* find leftmost column of bar */
|
---|
| 298 |
|
---|
| 299 | /* calculate initial GLC RAM write address */
|
---|
| 300 |
|
---|
| 301 | baradr = barcol + (85 * (63 - BBase)) + G_PLANE2;
|
---|
| 302 |
|
---|
| 303 | if (newbar < BCenter) { /* target below center */
|
---|
| 304 |
|
---|
| 305 | barloc1 = newbar; /* off limit */
|
---|
| 306 | barloc2 = BCenter; /* on limit */
|
---|
| 307 |
|
---|
| 308 | } else { /* target at or above center */
|
---|
| 309 |
|
---|
| 310 | barloc1 = BCenter; /* off limit */
|
---|
| 311 | barloc2 = newbar; /* on limit */
|
---|
| 312 | }
|
---|
| 313 |
|
---|
| 314 | LCD_WC = G_CRSMUP; /* set cursor motion "up" */
|
---|
| 315 |
|
---|
| 316 | /* |
---|
| 317 |
|
---|
| 318 | */
|
---|
| 319 | for (i = 0; i < 3; i++) { /* for each bar column ... */
|
---|
| 320 |
|
---|
| 321 | bardot = BarDots[i]; /* get the column dot value */
|
---|
| 322 | barpos = BBase; /* set current vert. position */
|
---|
| 323 |
|
---|
| 324 | LCD_WC = G_CRSWR; /* set cursor address */
|
---|
| 325 | LCD_WD = baradr & 0xFF;
|
---|
| 326 | LCD_WD = (baradr >> 8) & 0xFF;
|
---|
| 327 |
|
---|
| 328 | LCD_WC = G_MWRITE; /* setup to write */
|
---|
| 329 |
|
---|
| 330 | while (barpos < barloc1) { /* write "off" dots */
|
---|
| 331 |
|
---|
| 332 | LCD_WD = 0x00;
|
---|
| 333 | barpos++;
|
---|
| 334 | }
|
---|
| 335 |
|
---|
| 336 | while (barpos LE barloc2) { /* write "on" dots */
|
---|
| 337 |
|
---|
| 338 | LCD_WD = bardot;
|
---|
| 339 | barpos++;
|
---|
| 340 | }
|
---|
| 341 |
|
---|
| 342 | while (barpos LE BTop) { /* write "off" dots */
|
---|
| 343 |
|
---|
| 344 | LCD_WD = 0x00;
|
---|
| 345 | barpos++;
|
---|
| 346 | }
|
---|
| 347 |
|
---|
| 348 | ++baradr; /* update GLC start address */
|
---|
| 349 | }
|
---|
| 350 |
|
---|
| 351 | LCD_WC = G_CRSMRT; /* set cursor motion = "right" */
|
---|
| 352 | GLCcurs(G_OFF); /* turn off the cursor */
|
---|
| 353 |
|
---|
| 354 | BarCcur[bar] = newbar; /* update current bar position */
|
---|
| 355 | }
|
---|