source: buchla-68k/ram/initi.c@ d44e001

Last change on this file since d44e001 was 7ecfb7b, checked in by Thomas Lopatic <thomas@…>, 7 years ago

Unused variables and parameters.
  • Property mode set to 100644
File size: 11.8 KB
RevLine 
[f40a309]1/*
2 =============================================================================
3 initi.c -- MIDAS-VII - instrument editor support functions
4 Version 2 -- 1989-12-19 -- D.N. Lynx Crowe
5 =============================================================================
6*/
7
8#define DEBUGPS 0 /* define non-zero to debug pntsel() */
9
[b28a12e]10#include "ram.h"
[f40a309]11
12#include "dfltins.h" /* short dfltins[]; default instrument */
[7258c6a]13#include "ptoftab.h" /* int16_t ptoftab[]; pitch to frequency table */
[f40a309]14
[7258c6a]15int16_t finival[NFINST] = { /* initial function values */
[f40a309]16
17 FPUVAL(500), /* 0: Freq 1 */
18 FPUVAL(500), /* 1: Freq 2 */
19 FPUVAL(500), /* 2: Freq 3 */
20 FPUVAL(500), /* 3: Freq 4 */
21 FPUVAL(500), /* 4: Filter / Resonance */
22 FPUVAL(500), /* 5: Location */
23
24 FPUVAL(0), /* 6: Index 1 */
25 FPUVAL(0), /* 7: Index 2 */
26 FPUVAL(0), /* 8: Index 3 */
27 FPUVAL(0), /* 9: Index 4 */
28 FPUVAL(0), /* 10: Index 5 */
29 FPUVAL(0), /* 11: Index 6 */
30
31 FPUVAL(0) /* 12: Level */
32};
33
[7258c6a]34int16_t expbit[16] = { /* FPU time exponent bit expansion table */
[f40a309]35
36 0x0001, /* 0 */
37 0x0002, /* 1 */
38 0x0004, /* 2 */
39 0x0008, /* 3 */
40 0x0010, /* 4 */
41 0x0020, /* 5 */
42 0x0040, /* 6 */
43 0x0080, /* 7 */
44 0x0100, /* 8 */
45 0x0200, /* 9 */
46 0x0400, /* 10 */
47 0x0800, /* 11 */
48 0x1000, /* 12 */
49 0x2000, /* 13 */
50 0x4000, /* 14 */
51 0x8000 /* 15 */
52};
53
54/*
55 =============================================================================
56 segtime() -- determine time to a point using a new segment time
57 =============================================================================
58*/
59
[7258c6a]60int16_t segtime(int16_t pn, uint16_t ptime)
[f40a309]61{
62 register struct instpnt *pp;
[7258c6a]63 register int16_t i;
64 register uint16_t tacc;
[f40a309]65
66 pp = &vbufs[curvce].idhpnt[vbufs[curvce].idhfnc[curfunc].idfpt1];
67 tacc = 0;
68
69 for (i = 0; i < pn; i++)
70 tacc += fromfpu(pp++->iptim);
71
72 tacc += fromfpu(ptime);
73
74 return(tacc);
75}
76
77/*
78 =============================================================================
79 setseg() -- set the time to a segment
80 =============================================================================
81*/
82
[7258c6a]83void setseg(int16_t pn, uint16_t ptime)
[f40a309]84{
[7258c6a]85 register int16_t i;
86 register uint16_t tacc;
[f40a309]87 register struct instpnt *pp;
88
89 pp = &vbufs[curvce].idhpnt[vbufs[curvce].idhfnc[curfunc].idfpt1];
90 tacc = 0;
91
92 for (i = 0; i < pn; i++)
93 tacc += fromfpu(pp++->iptim);
94
95 pp->iptim = tofpu(ptime - tacc);
96}
97
98/*
99 =============================================================================
100 timeto() -- find the time at a point in a function
101 =============================================================================
102*/
103
[7258c6a]104int16_t timeto(int16_t fn, int16_t pj)
[f40a309]105{
106 register struct instdef *ip;
107 register struct instpnt *pt;
[7258c6a]108 register int16_t tf, pm, pn;
[f40a309]109
110 ip = &vbufs[curvce];
111 pn = ip->idhfnc[fn].idfpt1;
112 pt = &ip->idhpnt[pn];
113 pm = pn + pj;
114 tf = 0;
115
116 while (pn LE pm) {
117
118 tf += fromfpu(pt->iptim);
119 ++pt;
120 ++pn;
121 }
122
123 return(tf);
124}
125
126/*
127 =============================================================================
128 pntsel() -- setup editing limits for subj in the current function
129 =============================================================================
130*/
131
[0580615]132void pntsel(void)
[f40a309]133{
134 register struct idfnhdr *fp;
135
136 fp = &vbufs[curvce].idhfnc[curfunc];
137
138 curpnt = fp->idfpt1 + subj;
139 pntptr = &vbufs[curvce].idhpnt[curpnt];
140
141 npts = fp->idfpif;
142
143 if (npts EQ 1) { /* detemine editing case */
144
145 pecase = 0; /* single point */
146 temin = 1;
147 temax = 32767;
148
149 } else if (subj EQ (npts - 1)) {
150
151 pecase = 1; /* last point */
152 temin = timeto(curfunc, subj - 1);
153 temax = 32767;
154
155 } else {
156
157 pecase = 2; /* interior point */
158 temin = timeto(curfunc, subj - 1);
159 temax = timeto(curfunc, subj + 1);
160 }
161
162#if DEBUGPS
163 printf("pntsel(): curpnt=%d, subj=%d, fp=0x%08lx, pntptr=0x%08lx\r\n",
164 curpnt, subj, fp, pntptr);
165 printf("pntsel(): npts=%d, pecase=%d, temin=%d, temax=%d\r\n",
166 npts, pecase, temin, temax);
167#endif
168}
169
170/*
171 =============================================================================
172 vtoy() -- convert a value to a y coordinate for display
173 =============================================================================
174*/
175
[7258c6a]176int16_t vtoy(int16_t val, int16_t window)
[f40a309]177{
[7258c6a]178 register int16_t yval;
[f40a309]179
180 if (val GT 1000)
181 val = 1000;
182
183 yval = 56 + (((1000 - val) * 14) / 100);
184
185 if (window < 12)
[7258c6a]186 return((int16_t)(idbox[window][1] + (((yval - 56) * 100L) / 540L)));
[f40a309]187 else
188 return(yval);
189}
190
191/*
192 =============================================================================
193 ttox() -- convert a time to an x coordinate for display
194 =============================================================================
195*/
196
[7258c6a]197int16_t ttox(uint16_t time, int16_t window)
[f40a309]198{
[7258c6a]199 register int16_t xval;
[f40a309]200
201 if (time < 128) /* 0..127 */
[7258c6a]202 xval = 8 + (int16_t)(((time * 1000L) / 2309L));
[f40a309]203 else if (time < 256) /* 128..255 */
[7258c6a]204 xval = 64 + (int16_t)((((time - 128) * 1000L) / 2309L));
[f40a309]205 else if (time < 512) /* 256..511 */
[7258c6a]206 xval = 120 + (int16_t)((((time - 256) * 1000L) / 4636L));
[f40a309]207 else if (time < 1024) /* 512..1023 */
[7258c6a]208 xval = 176 + (int16_t)((((time - 512) * 1000L) / 9290L));
[f40a309]209 else if (time < 2048) /* 1024..2047 */
[7258c6a]210 xval = 232 + (int16_t)((((time - 1024) * 1000L) / 18600L));
[f40a309]211 else if (time < 4096) /* 2048..4095 */
[7258c6a]212 xval = 288 + (int16_t)((((time - 2048) * 1000L) / 37218L));
[f40a309]213 else if (time < 8192) /* 4096..8191 */
[7258c6a]214 xval = 344 + (int16_t)((((time - 4096) * 1000L)/ 74454L));
[f40a309]215 else if (time < 16384) /* 8192..16383 */
[7258c6a]216 xval = 400 + (int16_t)((((time - 8192) * 1000L) / 148927L));
217 else if (time < (uint16_t)32768) /* 16384..32767 */
218 xval = 456 + (int16_t)((((time - 16384) * 1000L) / 309113L));
[f40a309]219 else
220 xval = 509;
221
222 if (xval > 509)
223 xval = 509;
224
225 if (window < 12)
[7258c6a]226 return((int16_t)(idbox[window][0] + (((xval - 8) * 100L) / 599L)));
[f40a309]227 else
228 return(xval);
229}
230
231/*
232 =============================================================================
233 selpnt() -- select a point for editing
234 =============================================================================
235*/
236
[7258c6a]237int16_t selpnt(void)
[f40a309]238{
239 register struct idfnhdr *fp;
240
[7258c6a]241 register int16_t i, xv, np;
[f40a309]242
[7258c6a]243 int16_t lo_x, lo_x_pt, hi_x, hi_x_pt;
[f40a309]244
245 fp = &vbufs[curvce].idhfnc[curfunc];
246 np = fp->idfpif;
247 lo_x_pt = 0;
248 lo_x = ttox(timeto(curfunc, lo_x_pt), 12);
249 hi_x_pt = np - 1;
250 hi_x = ttox(timeto(curfunc, hi_x_pt), 12);
251
252 for (i = 0; i < np; i++) {
253
254 xv = ttox(timeto(curfunc, i), 12);
255
256 if (xv LE cxval) /* largest x LE cxval */
257 if (xv GE lo_x) {
258
259 lo_x = xv;
260 lo_x_pt = i;
261 }
262
263 if (xv GE cxval) /* smallest x GE cxval*/
264 if (xv LT hi_x) {
265
266 hi_x = xv;
267 hi_x_pt = i;
268 }
269 }
270
271 if (lo_x EQ hi_x)
272 return(lo_x_pt);
273
274 if ((cxval - lo_x) LT (hi_x - cxval))
275 return(lo_x_pt);
276 else
277 return(hi_x_pt);
278}
279
280/*
281 =============================================================================
282 setinst() -- setup for editing a new instrument
283 =============================================================================
284*/
285
[0580615]286void setinst(void)
[f40a309]287{
288 register struct instdef *ip;
289 register struct idfnhdr *fp;
290
291 curfunc = 12; /* current function = 12 = level */
292 subj = 0; /* current edited point = 0 (first point) */
293 pntsv = 0; /* point selection state = unselected */
294 pecase = 0; /* point selection case = 0 (first point) */
295
296 ip = &vbufs[curvce]; /* instrument definition pointer */
297 fp = &ip->idhfnc[curfunc]; /* function pointer */
298
299 curpnt = subj + fp->idfpt1; /* current point in function */
300 pntptr = &ip->idhpnt[curpnt]; /* current point pointer */
301
302 newws(); /* setup waveshape variables */
303}
304
305/*
306 =============================================================================
307 newinst() -- select a new instrument
308 =============================================================================
309*/
310
[7258c6a]311void newinst(int16_t inst)
[f40a309]312{
313 curinst = inst;
314 s_inst[curvce] = inst;
315 setinst();
316}
317
318/*
319 =============================================================================
320 newvce() -- select a new voice
321 =============================================================================
322*/
323
[7258c6a]324void newvce(int16_t voice)
[f40a309]325{
326 curvce = voice;
327 curinst = s_inst[curvce];
328 setinst();
329}
330
331/*
332 =============================================================================
333 setivce() -- set instrument definition for a voice
334 =============================================================================
335*/
336
[7258c6a]337void setivce(int16_t voice)
[f40a309]338{
[7ecfb7b]339 register int16_t j, k, oldi;
[f40a309]340 register struct instdef *ip;
341
342 ip = &vbufs[voice];
343
344 oldi = setipl(FPU_DI); /* disable FPU interrupts */
345
346/* +++++++++++++++++++++++ FPU interrupts disabled ++++++++++++++++++++++++++ */
347
348 for (j = 0; j < NFINST; j++) { /* set funcndx[] entries */
349
350 k = (voice << 4) + fnoff[j];
351 funcndx[k][0] = &ip->idhfnc[j];
352 funcndx[k][1] = ip->idhpnt;
353 }
354
355 /* set waveshapes */
356
357 memcpyw((io_fpu + FPU_OWST + (voice << 9) + 0x0100 + 1),
358 ip->idhwvaf, NUMWPNT);
359
360 memcpyw((io_fpu + FPU_OWST + (voice << 9) + 1),
361 ip->idhwvbf, NUMWPNT);
362
363 setipl(oldi); /* restore interrupts */
364
365/* ++++++++++++++++++++++++++ Interrupts restored +++++++++++++++++++++++++++ */
366
367 instmod[voice] = FALSE; /* instrument matches library */
368}
369
370/*
371 =============================================================================
372 modinst() -- handle instrument modifications
373 =============================================================================
374*/
375
[0580615]376void modinst(void)
[f40a309]377{
[7258c6a]378 int16_t f, i, grp, oldi;
[f40a309]379
380 if (NOT instmod[curvce]) {
381
382 instmod[curvce] = TRUE;
383 dswin(19);
384 }
385
386 if (NOT editsw) {
387
388 if ((grp = vce2grp[curvce]) > 0) {
389
390 oldi = setipl(FPU_DI); /* +++++ disable FPU interrupts */
391
392 for (i = 0; i < 12; i++) {
393
394 if (vce2grp[i] EQ grp) {
395
396 memcpyw(&vbufs[i], &vbufs[curvce],
397 sizeof (struct instdef) / 2);
398
399 for (f = 0; f < 12; f++)
400 vbufs[i].idhfnc[f].idftmd
401 &= ~I_ACTIVE;
402
403 s_inst[i] = curinst;
404 clrvce(i);
405 setivce(i);
406 dosync(i);
407 execkey(0, 0, i, 1);
408 vce2trg[i] = -1;
409 }
410 }
411
412 setipl(oldi); /* +++++ enable FPU interrupts */
413 }
414 }
415}
416
417/*
418 =============================================================================
419 initi() -- initialize an instrument definition
420 =============================================================================
421*/
422
[0580615]423void initi(struct instdef *ip)
[f40a309]424{
[7258c6a]425 register int16_t i, mintfpu, rb;
[f40a309]426
427 memsetw(ip, 0, sizeof (struct instdef) / 2);
428
429 memcpy(ip->idhname, " ", MAXIDLN+1);
430 memcpy(ip->idhcom1, " ", MAXIDLN+1);
431 memcpy(ip->idhcom2, " ", MAXIDLN+1);
432 memcpy(ip->idhcom3, " ", MAXIDLN+1);
433
434 ip->idhplft = NIPNTS - NFINST;
435 ip->idhcfg = (initcfg >> 8) & 0x00FF;
436 mintfpu = tofpu(1);
437
438 for (i = 0; i < NFINST; i++) { /* for each function ... */
439
440 /* initialize the function header */
441
442 rb = ((i < 4) AND (i NE 0)) ? 0 : I_NRATIO;
443 ip->idhfnc[i].idfpif = 1;
444 ip->idhfnc[i].idfpt1 = i;
445 ip->idhfnc[i].idftmd = (I_TM_KEY | 0x0010) | rb;
446
447 /* initialize the first point in the function */
448
449 ip->idhpnt[i].iptim = mintfpu;
450 ip->idhpnt[i].ipval = finival[i];
451 }
452
453 for (i = 0; i < NUMWPNT; i++) {
454
455 ip->idhwvaf[i] = (ip->idhwvao[i] = 0x8000 ^ ((i + 1) << 8));
456 ip->idhwvbf[i] = (ip->idhwvbo[i] = 0x8000 ^ ((i + 1) << 8));
457 }
458}
459
460/*
461 =============================================================================
462 initil() -- initialize instrument library
463 =============================================================================
464*/
465
[0580615]466void initil(void)
[f40a309]467{
[7258c6a]468 register int16_t i;
[f40a309]469
470 setipl(FPU_DI); /* disable FPU interrupts */
471
472/* +++++++++++++++++++++++ FPU interrupts disabled ++++++++++++++++++++++++++ */
473
474 fpuclr(); /* clear the FPU */
475
476 memcpyw(&idefs[0], dfltins, sizeof (struct instdef) / 2);
477
478 for (i = 1; i < NINST; i++) /* initialize each instrument */
479 initi(&idefs[i]);
480
481 memset(funcndx, 0, sizeof funcndx);
482
483 for (i = 0; i < 12; i++) { /* initialize voices */
484
485 memcpyw(&vbufs[i], &idefs[0], sizeof (struct instdef) / 2);
486 setivce(i);
487 }
488
489 setipl(FPU_EI); /* enable FPU interrupts */
490
491/* ++++++++++++++++++++++++++ Interrupts enabled ++++++++++++++++++++++++++++ */
492
493 newvce(0); /* setup editing for instrument 0, voice 0 */
494 newinst(0);
495}
496
[6262b5c]497
Note: See TracBrowser for help on using the repository browser.