source: buchla-68k/ram/lcdlbls.c@ 4810254

Last change on this file since 4810254 was fa38804, checked in by Thomas Lopatic <thomas@…>, 7 years ago

Removed form-feed comments.

  • Property mode set to 100644
File size: 37.3 KB
Line 
1/*
2 =============================================================================
3 lcdlbls.c -- MIDAS-VII front panel support functions
4 Version 48 -- 1989-12-19 -- D.N. Lynx Crowe
5 =============================================================================
6*/
7
8#define ROMPOK 1 /* non-zero enables the ROMP switch */
9
10#include "ram.h"
11
12#define ARTIVAL(x) (x << 5)
13#define SL2GAIN(x) (sl2gain[(x >> 11) + 16])
14
15#if ROMPOK
16#define ROMPFN trapper /* ROMP switch table entry */
17#else
18#define ROMPFN l_none /* ROMP switch table entry */
19#endif
20
21#define PCHMAX 21920L /* maximum pitch value */
22
23/* initialized stuff */
24
25/* BarType -- LCD slider bar graph type table -- 0 = bottom, 1 = centered */
26
27int16_t BarType[14] = { 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 1, 0 };
28
29int16_t artitab[] = { /* articulation pot initialization values */
30
31 ARTIVAL(500), /* locn */
32 ARTIVAL(0), /* level */
33 ARTIVAL(0), /* ind 1 */
34 ARTIVAL(0), /* ind 2 */
35 ARTIVAL(0), /* ind 3 */
36 ARTIVAL(500), /* frq 1 */
37 ARTIVAL(500), /* frq 2 */
38 ARTIVAL(500), /* frq 3 */
39 ARTIVAL(500), /* frq 4 */
40 ARTIVAL(0), /* ind 4 */
41 ARTIVAL(0), /* ind 5 */
42 ARTIVAL(0), /* ind 6 */
43 ARTIVAL(500), /* filtr */
44 ARTIVAL(0) /* reson */
45};
46
47/* arpar[] -- articulation parameter map */
48/* sigtab[ 25 26 27 28 29 30 31 32 33 34 35 36 37 38] */
49
50int16_t arpar[] = { 4, 2, 9, 11, 12, 1, 3, 5, 7, 13, 14, 15, 10, 6};
51
52int16_t sl2gain[32] = { /* slider value to EQ gain conversion table */
53
54 -12, -12, -12, -12, -12, -11, -10, -9 ,-8 ,-7, -6, -5, -4, -3, -2, -1,
55 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 12, 12, 12
56};
57
58uint16_t vmasks[16] = { /* variable resolution masks */
59
60 0x8000, 0xC000, 0xE000, 0xF000,
61 0xF800, 0xFC00, 0xFE00, 0xFF00,
62 0xFF80, 0xFFC0, 0xFFE0, 0xFFF0,
63 0xFFF8, 0xFFFC, 0xFFFE, 0xFFFF
64};
65
66int16_t src2var[14] = { /* source number to analog variable number map */
67
68 -1, -1, 3, -1, -1, -1, 5, -1, 4, -1, -1, 0, 1, 2 };
69
70int8_t *potlbls[] = { /* LCD pot labels */
71
72 /* Pot: 25 26 27 28 29 30 31 32 33 34 35 36 37 38 */
73
74 /* 0 */ "Locn Level Ind 1 Ind 2 Ind 3 Frq 1 Frq 2 Frq 3 Frq 4 Ind 4 Ind 5 Ind 6 Filtr Reson",
75 /* 1 */ "Locn Level Ind 1 Ind 2 Ind 3 Frq 1 Frq 2 Frq 3 Frq 4 Ind 4 Ind 5 Ind 6 Filtr Reson",
76 /* 2 */ " Aux Depth Rate Inten CV 1 CV 2 CV 3 CV 4 ",
77 /* 3 */ " 50 150 400 1k 2.5k 6k 15k 50 150 400 1k 2.5k 6k 15k ",
78 /* 4 */ "Locn Level Ind 1 Ind 2 Ind 3 Frq 1 Frq 2 Frq 3 Frq 4 Ind 4 Ind 5 Ind 6 Filtr Reson",
79 /* 5 */ "Locn Level Ind 1 Ind 2 Ind 3 Frq 1 Frq 2 Frq 3 Frq 4 Ind 4 Ind 5 Ind 6 Filtr Reson",
80 /* 6 */ "Locn Level Ind 1 Ind 2 Ind 3 Frq 1 Frq 2 Frq 3 Frq 4 Ind 4 Ind 5 Ind 6 Filtr Reson",
81 /* 7 */ "Locn Level Ind 1 Ind 2 Ind 3 Frq 1 Frq 2 Frq 3 Frq 4 Ind 4 Ind 5 Ind 6 Filtr Reson"
82};
83
84#if ROMPOK
85int8_t *swtlbls[] = { /* LCD switch labels -- ROMP ENABLED */
86
87 /* 0 */ "Quiet ROMP Lamp Clock P/R Go To Instr Asgmt Load Other Voice Init ",
88 /* 1 */ " Voice Init ",
89 /* 2 */ "Quiet ROMP Lamp Clock P/R Go To Instr Asgmt Load EQ Voice Init ",
90 /* 3 */ "Quiet ROMP Lamp Clock P/R Go To Instr Asgmt Load Prmtr Voice Init ",
91 /* 4 */ " +00 Deflt",
92 /* 5 */ "Quiet ROMP Lamp Clock P/R Go To Instr Asgmt Load Other Voice Deflt",
93 /* 6 */ "Quiet ROMP Lamp Clock P/R ",
94 /* 7 */ "Quiet ROMP Lamp Load "
95};
96#else
97char *swtlbls[] = { /* LCD switch labels -- ROMP DISABLED */
98
99 /* 0 */ "Quiet Lamp Clock P/R Go To Instr Asgmt Load Other Voice Init ",
100 /* 1 */ " Voice Init ",
101 /* 2 */ "Quiet Lamp Clock P/R Go To Instr Asgmt Load EQ Voice Init ",
102 /* 3 */ "Quiet Lamp Clock P/R Go To Instr Asgmt Load Prmtr Voice Init ",
103 /* 4 */ " +00 Deflt",
104 /* 5 */ "Quiet Lamp Clock P/R Go To Instr Asgmt Load Other Voice Deflt",
105 /* 6 */ "Quiet Lamp Clock P/R ",
106 /* 7 */ "Quiet Lamp Load "
107};
108#endif
109
110int8_t *aslbls[] = { /* Assignment select key labels */
111
112 "Asgmt", /* 0 */
113 " +00 ", /* 1 */
114 " +20 ", /* 2 */
115 " +40 ", /* 3 */
116 " +60 ", /* 4 */
117 " +80 " /* 5 */
118};
119
120LPF t_prmtr[] = { /* switch assignments for LS_PRMTR */
121
122 quiet, /* 0: Quiet */
123 ROMPFN, /* 1: ROMP */
124
125 setlamp, /* 2: Lamp */
126 l_clock, /* 3: Clock */
127 rpctl, /* 4: R/P */
128
129 l_goto, /* 5: Go To */
130 l_inst, /* 6: Instr */
131 l_asgn, /* 7: Asgmt */
132 l_load, /* 8: Load */
133
134 l_none, /* 9: -unused- */
135 l_none, /* 10: -unused- */
136 l_other, /* 11: Other */
137
138 l_prmtr, /* 12: Prmtr */
139 l_init /* 13: Init */
140};
141
142LPF t_voice[] = { /* switch assignments for LS_VOICE */
143
144 l_voice, /* 0: toggle voice status */
145 l_voice, /* 1: toggle voice status */
146
147 l_voice, /* 2: toggle voice status */
148 l_voice, /* 3: toggle voice status */
149 l_voice, /* 4: toggle voice status */
150
151 l_voice, /* 5: toggle voice status */
152 l_voice, /* 6: toggle voice status */
153 l_voice, /* 7: toggle voice status */
154 l_voice, /* 8: toggle voice status */
155
156 l_voice, /* 9: toggle voice status */
157 l_voice, /* 10: toggle voice status */
158 l_voice, /* 11: toggle voice status */
159
160 l_prmtr, /* 12: Prmtr */
161 l_init /* 13: Init */
162};
163
164LPF t_other[] = { /* switch assignments for LS_OTHER */
165
166 quiet, /* 0: Quiet */
167 ROMPFN, /* 1: ROMP */
168
169 setlamp, /* 2: Lamp */
170 l_clock, /* 3: Clock */
171 rpctl, /* 4: R/P */
172
173 l_goto, /* 5: Go To */
174 l_inst, /* 6: Instr */
175 l_asgn, /* 7: Asgmt */
176 l_load, /* 8: Load */
177
178 l_none, /* 9: -unused- */
179 l_none, /* 10: -unused- */
180 l_eq, /* 11: EQ */
181
182 l_prmtr, /* 12: Prmtr */
183 l_init /* 13: Init */
184};
185
186LPF t_eq[] = { /* switch assignments for LS_EQ */
187
188 quiet, /* 0: Quiet */
189 ROMPFN, /* 1: ROMP */
190
191 setlamp, /* 2: Lamp */
192 l_clock, /* 3: Clock */
193 rpctl, /* 4: R/P */
194
195 l_goto, /* 5: Go To */
196 l_inst, /* 6: Instr */
197 l_asgn, /* 7: Asgmt */
198 l_load, /* 8: Load */
199
200 l_none, /* 9: -unused- */
201 l_none, /* 10: -unused- */
202 l_eq, /* 11: Prmtr */
203
204 l_prmtr, /* 12: Voice */
205 l_init /* 13: Init */
206};
207
208LPF t_inst[] = { /* switch assignments for LS_INST */
209
210 l_group, /* 0: toggle group status */
211 l_group, /* 1: toggle group status */
212
213 l_group, /* 2: toggle group status */
214 l_group, /* 3: toggle group status */
215 l_group, /* 4: toggle group status */
216
217 l_group, /* 5: toggle group status */
218 l_group, /* 6: toggle group status */
219 l_group, /* 7: toggle group status */
220 l_group, /* 8: toggle group status */
221
222 l_group, /* 9: toggle group status */
223 l_group, /* 10: toggle group status */
224 l_group, /* 11: toggle group status */
225
226 l_inst, /* 12: 01-20 / 21-40 */
227 l_dflt /* 13: Deflt */
228};
229
230LPF t_libr[] = { /* switch assignments for LS_LIBR */
231
232 quiet, /* 0: Quiet */
233 ROMPFN, /* 1: ROMP */
234
235 setlamp, /* 2: Lamp */
236 l_clock, /* 3: Clock */
237 rpctl, /* 4: R/P */
238
239 l_none, /* 5: -unused- */
240 l_none, /* 6: -unused- */
241 l_none, /* 7: -unused- */
242 l_none, /* 8: -unused- */
243
244 l_none, /* 9: -unused- */
245 l_none, /* 10: -unused- */
246 l_none, /* 11: -unused- */
247
248 l_none, /* 12: -unused- */
249 l_none /* 13: -unused- */
250};
251
252LPF t_ngrp[] = { /* switch assignments for LS_NGRP */
253
254 quiet, /* 0: Quiet */
255 ROMPFN, /* 1: ROMP */
256
257 setlamp, /* 2: Lamp */
258 l_clock, /* 3: Clock */
259 rpctl, /* 4: R/P */
260
261 l_none, /* 5: -unused- */
262 l_none, /* 6: -unused- */
263 l_none, /* 7: -unused- */
264 l_none, /* 8: -unused- */
265
266 l_none, /* 9: -unused- */
267 l_none, /* 10: -unused- */
268 l_none, /* 11: -unused- */
269
270 l_none, /* 12: -unused- */
271 l_none /* 13: -unused- */
272};
273
274LPF t_load[] = { /* switch assignments for LS_LOAD */
275
276 quiet, /* 0: Quiet */
277 ROMPFN, /* 1: ROMP */
278
279 setlamp, /* 2: Lamp */
280 l_none, /* 3: -unused- */
281 l_none, /* 4: -unused- */
282
283 l_none, /* 5: -unused- */
284 l_none, /* 6: -unused- */
285 l_none, /* 7: -unused- */
286 l_load, /* 8: Load */
287
288 l_none, /* 9: -unused- */
289 l_none, /* 10: -unused- */
290 l_none, /* 11: -unused- */
291
292 l_none, /* 12: -unused- */
293 l_none /* 13: -unused- */
294};
295
296/*
297 =============================================================================
298 l_none() -- null function
299 =============================================================================
300*/
301
302void l_none(int16_t _1, int16_t _2)
303{
304}
305
306/*
307 =============================================================================
308 quiet() -- quiet the instrument
309 =============================================================================
310*/
311
312void quiet(int16_t _1, int16_t _2)
313{
314 register int16_t vce;
315
316 for (vce = 0; vce < 12; vce++) /* for each voice ... */
317 sendval(vce, 2, 0); /* ... set level = 0 */
318
319 memsetw(seqflag, 0, 16); /* stop the sequences */
320 memsetw(seqtime, 0, 16); /* ... */
321
322 memsetw(trstate, 0, 16); /* reset the triggers */
323
324 seqdupd = 0xFFFF; /* request display update */
325
326 stmproc(NULL_DEF); /* trigger the blank definer */
327}
328
329/*
330 =============================================================================
331 rpctl() -- toggle record/play switch
332 =============================================================================
333*/
334
335void rpctl(int16_t stat, int16_t _2)
336{
337 if (NOT stat)
338 return;
339
340 recsw = NOT recsw;
341 dsrpmod();
342}
343
344/*
345 =============================================================================
346 trapper() -- trap to ROMP
347 =============================================================================
348*/
349
350void trapper(int16_t stat, int16_t _2)
351{
352 if (stat)
353 xtrap15();
354}
355
356/*
357 =============================================================================
358 l_clock() -- process 'Clock' switch
359 =============================================================================
360*/
361
362void l_clock(int16_t stat, int16_t _2)
363{
364 if (NOT stat)
365 return;
366
367 clkset(NOT clkrun);
368 dclkmd();
369}
370
371/*
372 =============================================================================
373 ulamp() -- underline lamp if forced on
374 =============================================================================
375*/
376
377void ulamp(void)
378{
379 if ((sliders EQ LS_VOICE) OR (sliders EQ LS_INST))
380 return;
381
382 point = GLCplot; /* setup to draw line */
383 GLCcurs(G_ON);
384
385 if (lampsw)
386 lseg (LAMP_XL, LAMP_Y, LAMP_XR, LAMP_Y, 1);
387 else
388 lseg (LAMP_XL, LAMP_Y, LAMP_XR, LAMP_Y, 0);
389
390 GLCcurs(G_OFF);
391}
392
393/*
394 =============================================================================
395 preio() -- turn off LCD backlight before disk I/O
396 =============================================================================
397*/
398
399void preio(void)
400{
401 int16_t oldipl;
402
403 oldipl = setipl(TIM_DI);
404
405 lampio = lampsw;
406 iotime = lcdtime;
407 lampsw = FALSE;
408 io_leds = 0x1F;
409
410 setipl(oldipl);
411}
412
413/*
414 =============================================================================
415 postio() -- restore LCD backlight state after disk I/O
416 =============================================================================
417*/
418
419void postio(void)
420{
421 int16_t oldipl;
422
423 oldipl = setipl(TIM_DI);
424
425 lampsw = lampio;
426
427 if (iotime OR lampsw) {
428
429 lcdtime = lcdontm;
430 io_leds = 0x9F;
431 }
432
433 setipl(oldipl);
434}
435
436/*
437 =============================================================================
438 setlamp() -- toggle LCD backlight mode
439 =============================================================================
440*/
441
442void setlamp(int16_t stat, int16_t _2)
443{
444 register int16_t oldi;
445
446 if (NOT stat) /* only act on key closures */
447 return;
448
449 oldi = setipl(TIM_DI); /* disable interrupts to keep out the timer */
450
451 lcdtime = lcdontm; /* set the LCD backlight timer */
452
453 if (lampsw) {
454
455 lampsw = FALSE; /* enable LCD timeouts */
456 io_leds = 0x1F; /* turn off the LCD backlight */
457
458 } else {
459
460 lampsw = TRUE; /* disable LCD timeouts */
461 io_leds = 0x9F; /* turn on the LCD backlight */
462 }
463
464 setipl(oldi); /* turn interrupts back on */
465
466 ulamp(); /* update underline on lamp key label */
467}
468
469/*
470 =============================================================================
471 lcd_on() -- turn on the LCD backlight
472 =============================================================================
473*/
474
475void lcd_on(void)
476{
477 register int16_t oldi;
478
479 oldi = setipl(TIM_DI); /* disable interrupts to keep out the timer */
480
481 lcdtime = lcdontm; /* set the LCD backlight timer */
482 io_leds = 0x9F; /* turn on the LCD backlight */
483
484 setipl(oldi); /* turn interrupts back on */
485}
486
487/*
488 =============================================================================
489 loadkey() -- process data keys in load mode
490 =============================================================================
491*/
492
493void loadkey(int16_t key)
494{
495 if (NOT astat)
496 return;
497
498 if (loadsw) { /* if it's load time */
499
500 if (key < 7) { /* ... and the key is valid */
501
502 loadem(key + 'A'); /* ... load the files */
503
504 loadsw = FALSE;
505 ltagged = FALSE;
506 d_key = olddkey;
507 x_key = oldxkey;
508 e_key = oldekey;
509 m_key = oldmkey;
510 pkctrl = oldpk;
511 sliders = oldsl;
512 swpt = oldsw;
513 lcdlbls();
514 }
515
516 return;
517 }
518}
519
520/*
521 =============================================================================
522 pcancel() -- cancel panel modes
523 =============================================================================
524*/
525
526void pcancel(int16_t pm)
527{
528 point = GLCplot; /* setup to plot on LCD */
529 GLCcurs(G_ON);
530
531 if ((pm NE 0) AND asmode) {
532
533 /* cancel assignment mode */
534
535 asmode = 0;
536 pkctrl = oldpk;
537 swpt = oldsw;
538 lseg(ASGN_XL, ASGN_Y, ASGN_XR, ASGN_Y, 0);
539 }
540
541 if ((pm NE 1) AND (gomode NE GO_NULL)) {
542
543 /* cancel Go To mode */
544
545 gomode = GO_NULL;
546 pkctrl = oldpk;
547 lseg(GOTO_XL, GOTO_Y, GOTO_XR, GOTO_Y, 0);
548 }
549
550 if ((pm NE 2) AND (ismode NE IS_NULL)) {
551
552 /* cancel instrument select mode */
553
554 ismode = IS_NULL;
555 pkctrl = oldpk;
556 sliders = oldsl;
557 swpt = oldsw;
558 lcdlbls();
559 }
560
561 GLCcurs(G_OFF);
562 setleds();
563}
564
565/*
566 =============================================================================
567 l_load() -- process "Load" key
568 =============================================================================
569*/
570
571void l_load(int16_t stat, int16_t _2)
572{
573 if (NOT stat)
574 return;
575
576 pcancel(3); /* cancel panel selections */
577 lcancel(3); /* cancel librarian selections */
578
579 point = GLCplot; /* setup to plot on LCD */
580 GLCcurs(G_ON);
581
582 if (loadsw) { /* if load is selected, deselect */
583
584 d_key = olddkey;
585 e_key = oldekey;
586 m_key = oldmkey;
587 x_key = oldxkey;
588
589 pkctrl = oldpk;
590 sliders = oldsl;
591 swpt = oldsw;
592
593 loadsw = FALSE;
594
595 lcdlbls();
596
597 } else { /* setup for load mode */
598
599 clkset(0); /* stop the clock */
600
601 if (ltagged) { /* cancel tag mode */
602
603 dslslot(tagslot, exp_c(LCFBX01), loadrow);
604 ltagged = FALSE;
605 }
606
607 if ((pkctrl EQ PK_PFRM) OR (pkctrl EQ PK_NOTE))
608 oldpk = pkctrl;
609
610 if (sliders NE LS_LOAD)
611 oldsl = sliders;
612
613 pkctrl = PK_LOAD;
614 sliders = LS_LOAD;
615 oldsw = swpt;
616 swpt = &t_load;
617
618 olddkey = d_key;
619 oldxkey = x_key;
620 oldekey = e_key;
621 oldmkey = m_key;
622 d_key = loadkey;
623 x_key = l_load;
624 e_key = l_load;
625 m_key = l_load;
626
627 loadsw = TRUE;
628
629 lcdlbls();
630 lseg(LOAD_XL, LOAD_Y, LOAD_XR, LOAD_Y, 1);
631 }
632
633 GLCcurs(G_OFF);
634 setleds();
635}
636
637/*
638 =============================================================================
639 lcdlbls() -- put up the labels on the LCD display
640 =============================================================================
641*/
642
643void lcdlbls(void)
644{
645 register int16_t i, barval;
646 int8_t buf[8];
647 int8_t dsp[86];
648
649 point = GLCplot; /* set up to plot on the LCD */
650
651 GLCinit(); /* clear the LCD display */
652 GLCcurs(G_ON);
653
654 /* label the switches */
655
656 switch (sliders) {
657
658 case LS_PRMTR: /* parameter articulation */
659 case LS_OTHER: /* other stuff */
660 case LS_EQ: /* equalization */
661
662 GLCtext(0, 1, swtlbls[sliders]);
663
664 switch (gomode) {
665
666 case GO_SECT:
667
668 GLCtext(0, 31, "Sectn");
669 lseg(GOTO_XL, GOTO_Y, GOTO_XR, GOTO_Y, 1);
670 break;
671
672 case GO_SCOR:
673
674 GLCtext(0, 31, "Score");
675 lseg(GOTO_XL, GOTO_Y, GOTO_XR, GOTO_Y, 1);
676 break;
677
678 default:
679
680 GLCtext(0, 31, "Go To");
681 lseg(GOTO_XL, GOTO_Y, GOTO_XR, GOTO_Y, 0);
682 break;
683 }
684
685 break;
686
687 case LS_VOICE: /* voice selection */
688
689 dsp[0] = '\0';
690
691 for (i = 0; i < 12; i++) {
692
693 sprintf(buf, "%c%2d %c ",
694 (articen[i] ? '\176' : ' '), i + 1,
695 (articen[i] ? '\177' : ' '));
696
697 strcat(dsp, buf);
698 }
699
700 strcat(dsp, "Voice Init ");
701
702 GLCtext(0, 1, dsp);
703 break;
704
705 case LS_INST: /* instrument selection */
706
707 dsp[0] = '\0';
708
709 for (i = 0; i < 12; i++) {
710
711 sprintf(buf, "%c%2d %c ",
712 (grpsel[i] ? '\176' : ' '), i + 1,
713 (grpsel[i] ? '\177' : ' '));
714
715 strcat(dsp, buf);
716 }
717
718 if (ismode EQ IS_HORC)
719 strcat(dsp, " +20 "); /* hi orc */
720 else
721 strcat(dsp, " +00 "); /* lo orc */
722
723 strcat(dsp, " Deflt");
724
725 GLCtext(0, 1, dsp);
726 break;
727
728 case LS_LIBR:
729 case LS_NGRP:
730 case LS_LOAD:
731
732 GLCtext(0, 1, swtlbls[sliders]);
733 break;
734 }
735
736
737 GLCtext(7, 1, potlbls[sliders]); /* label the pots */
738
739 for (i = 0; i < 13; i++)
740 lseg(39 + (i * 36), 0, 39 + (i * 36), 63, 1);
741
742 switch (sliders) { /* draw the slider bars */
743
744 case LS_PRMTR: /* parameter articulation */
745 case LS_VOICE: /* voice articulation enable */
746 case LS_INST: /* instrument select */
747 case LS_LIBR: /* library select */
748 case LS_NGRP: /* group select */
749 case LS_LOAD: /* load select */
750
751 for (i = 0; i < 14; i++) {
752
753 if (BarType[i]) {
754
755 barval = (((BGprmtr[i] >> 5) - 500) << 6) / 252;
756 BarCset(i, barval);
757
758 } else {
759
760 barval = BGprmtr[i] / 252;
761 BarBset(i, barval);
762 }
763 }
764
765 break;
766
767 case LS_OTHER:
768
769 for (i = 0; i < 14; i++)
770 BarBset(i, (BGother[i] / 252));
771
772 break;
773
774 case LS_EQ:
775
776 for (i = 0; i < 14; i++)
777 BarCset(i, BGeq[i]);
778
779 break;
780
781 default:
782
783 break;
784 }
785
786 GLCcurs(G_OFF);
787 dsrpmod();
788 dclkmd();
789 ulamp();
790}
791
792/*
793 =============================================================================
794 selasg() -- select assignment table
795 =============================================================================
796*/
797
798void selasg(int16_t n)
799{
800 register struct s_entry *ep;
801
802 getasg(curasg = n); /* set the assignment */
803
804 if (recsw) { /* if we're recording ... */
805
806 if (E_NULL NE (ep = findev(p_cur, t_cur, EV_ASGN, -1, -1))) {
807
808 ep->e_data1 = n; /* update old event */
809
810 } else if (E_NULL NE (ep = e_alc(E_SIZE2))) {
811
812 ep->e_type = EV_ASGN; /* create new event */
813 ep->e_data1 = n;
814 ep->e_time = t_cur;
815 p_cur = e_ins(ep, ep_adj(p_cur, 0, t_cur))->e_fwd;
816 eh_ins(ep, EH_ASGN);
817
818 if (ndisp EQ 2) { /* if the score is up ... */
819
820 ctrsw = TRUE;
821 se_disp(ep, D_FWD, gdstbc, 1);
822 scupd();
823 }
824 }
825 }
826
827 asmode = 0; /* drop out of assignment mode */
828 pkctrl = oldpk; /* restore previous mode */
829 swpt = oldsw;
830
831 point = GLCplot; /* update the LCD */
832 GLCcurs(G_ON);
833 lseg(ASGN_XL, ASGN_Y, ASGN_XR, ASGN_Y, 0);
834 GLCtext(0, 1, swtlbls[sliders]);
835 GLCcurs(G_OFF);
836
837 mpcupd(); /* update the video display ... */
838 setleds(); /* ... and the LEDs */
839}
840
841/*
842 =============================================================================
843 l_adfl() -- select default assignment table
844 =============================================================================
845*/
846
847void l_adfl(int16_t stat, int16_t _2)
848{
849 if (NOT stat)
850 return;
851
852 selasg(0);
853}
854
855/*
856 =============================================================================
857 l_asgn() -- select assignment
858 =============================================================================
859*/
860
861void l_asgn(int16_t stat, int16_t _2)
862{
863 if (NOT stat) /* only do this on key closure */
864 return;
865
866 point = GLCplot; /* set up to plot on the LCD */
867 GLCcurs(G_ON);
868
869 if (ismode NE IS_NULL) { /* cancel instrument select mode */
870
871 ismode = IS_NULL;
872 pkctrl = oldpk;
873 sliders = oldsl;
874 swpt = oldsw;
875 lcdlbls();
876 }
877
878 if (gomode NE GO_NULL) { /* cancel Go To mode */
879
880 gomode = GO_NULL;
881 pkctrl = oldpk;
882 lseg(GOTO_XL, GOTO_Y, GOTO_XR, GOTO_Y, 0);
883 }
884
885 switch (asmode) {
886
887 case 0: /* initial actuation */
888
889 if ((pkctrl EQ PK_PFRM) OR (pkctrl EQ PK_NOTE))
890 oldpk = pkctrl;
891
892 asmode = (curasg ? ((curasg - 1) / 20) : 0) + 1;
893 pkctrl = PK_ASGN;
894 memcpy(aswtbl, swpt, sizeof t_prmtr);
895 oldsw = swpt;
896 swpt = &aswtbl;
897 aswtbl[13] = l_adfl;
898 lseg(ASGN_XL, ASGN_Y, ASGN_XR, ASGN_Y, 1);
899 GLCtext(0, 79, "Deflt");
900 break;
901
902 case 1: /* +00 -- 01..20 to +20 */
903 case 2: /* +20 -- 21..40 to +40 */
904 case 3: /* +40 -- 41..60 to +60 */
905 case 4: /* +60 -- 61..80 to +80 */
906
907 ++asmode;
908 break;
909
910 case 5: /* +80 -- 81..99 to +00 */
911
912 asmode = 1;
913 break;
914
915 }
916
917 GLCtext(0, 43, aslbls[asmode]);
918 GLCcurs(G_OFF);
919 setleds();
920}
921
922/*
923 =============================================================================
924 l_inst() -- set select instrument mode
925 =============================================================================
926*/
927
928void l_inst(int16_t stat, int16_t _2)
929{
930 if (NOT stat)
931 return;
932
933 point = GLCplot; /* set up to plot on the LCD */
934 GLCcurs(G_ON);
935
936 if (asmode) { /* cancel assignment mode */
937
938 asmode = 0;
939 pkctrl = oldpk;
940 swpt = oldsw;
941 lseg(ASGN_XL, ASGN_Y, ASGN_XR, ASGN_Y, 0);
942 }
943
944 if (gomode NE GO_NULL) { /* cancel Go To mode */
945
946 gomode = GO_NULL;
947 pkctrl = oldpk;
948 lseg(GOTO_XL, GOTO_Y, GOTO_XR, GOTO_Y, 0);
949 }
950
951 GLCcurs(G_OFF);
952
953 switch (ismode) {
954
955 case IS_NULL: /* select +00 -- low orchestra */
956
957 if ((pkctrl EQ PK_PFRM) OR (pkctrl EQ PK_NOTE))
958 oldpk = pkctrl;
959
960 if (sliders NE LS_INST)
961 oldsl = sliders;
962
963 oldsw = swpt;
964 swpt = &t_inst;
965 pkctrl = PK_INST;
966 ismode = IS_LORC;
967 sliders = LS_INST;
968 lcdlbls();
969 break;
970
971 case IS_LORC: /* select +20 -- high orchestra */
972
973 ismode = IS_HORC;
974 GLCcurs(G_ON);
975 GLCtext(0, 73, " +20 ");
976 GLCcurs(G_OFF);
977 break;
978
979 case IS_HORC: /* deselect */
980 default:
981
982 ismode = IS_NULL;
983 pkctrl = oldpk;
984 sliders = oldsl;
985 swpt = oldsw;
986 lcdlbls();
987 break;
988 }
989
990 setleds();
991}
992
993/*
994 =============================================================================
995 selins() -- select an instrument
996 =============================================================================
997*/
998
999void selins(int16_t ival)
1000{
1001 register int16_t n;
1002 register struct s_entry *ep;
1003
1004 for (n = 0; n < 12; n++) {
1005
1006 if (FALSE EQ grpsel[n])
1007 continue;
1008
1009 ins2grp[n] = ival | (ins2grp[n] & 0xFF00);
1010 setv2gi(n);
1011
1012 if (recsw AND grpstat[n] AND (2 EQ grpmode[n])) {
1013
1014 if (E_NULL NE (ep = findev(p_cur, t_cur, EV_INST, n, -1))) {
1015
1016 ep->e_data2 = ival;
1017
1018 } else if (E_NULL NE (ep = e_alc(E_SIZE2))) {
1019
1020 ep->e_type = EV_INST;
1021 ep->e_data1 = n;
1022 ep->e_data2 = ival;
1023 ep->e_time = t_cur;
1024 p_cur = e_ins(ep, ep_adj(p_cur, 0, t_cur))->e_fwd;
1025 eh_ins(ep, EH_INST);
1026
1027 if (ndisp EQ 2) {
1028
1029 ctrsw = TRUE;
1030 se_disp(ep, D_FWD, gdstbc, 1);
1031 scupd();
1032 }
1033 }
1034 }
1035 }
1036
1037 setinst();
1038
1039
1040 ismode = IS_NULL;
1041 pkctrl = oldpk;
1042 sliders = oldsl;
1043 swpt = oldsw;
1044 lcdlbls();
1045 setleds();
1046 mpcupd();
1047}
1048
1049/*
1050 =============================================================================
1051 l_dflt() -- select default isntrument
1052 =============================================================================
1053*/
1054
1055void l_dflt(int16_t stat, int16_t _2)
1056{
1057 if (NOT stat)
1058 return;
1059
1060 selins(0);
1061}
1062
1063/*
1064 =============================================================================
1065 l_goto() -- go to (section / score)
1066 =============================================================================
1067*/
1068
1069void l_goto(int16_t stat, int16_t _2)
1070{
1071 if (NOT stat) /* only do this on key closure */
1072 return;
1073
1074 point = GLCplot; /* set up to plot on the LCD */
1075 GLCcurs(G_ON);
1076
1077 if (asmode) { /* cancel assignment mode */
1078
1079 asmode = 0;
1080 pkctrl = oldpk;
1081 swpt = oldsw;
1082 lseg(ASGN_XL, ASGN_Y, ASGN_XR, ASGN_Y, 0);
1083 }
1084
1085 if (ismode NE IS_NULL) { /* cancel instrument select mode */
1086
1087 ismode = IS_NULL;
1088 sliders = oldsl;
1089 pkctrl = oldpk;
1090 swpt = oldsw;
1091 lcdlbls();
1092 }
1093
1094 recsw = FALSE; /* force play mode */
1095 dsrpmod();
1096
1097 switch (gomode) { /* select Go To mode */
1098
1099 case GO_NULL:
1100
1101 if ((pkctrl EQ PK_PFRM) OR (pkctrl EQ PK_NOTE))
1102 oldpk = pkctrl;
1103
1104 pkctrl = PK_GOTO;
1105 gomode = GO_SECT;
1106 GLCtext(0, 31, "Sectn");
1107 lseg(GOTO_XL, GOTO_Y, GOTO_XR, GOTO_Y, 1);
1108 break;
1109
1110 case GO_SECT:
1111
1112 gomode = GO_SCOR;
1113 GLCtext(0, 31, "Score");
1114 lseg(GOTO_XL, GOTO_Y, GOTO_XR, GOTO_Y, 1);
1115 break;
1116
1117 case GO_SCOR:
1118 default:
1119
1120 pkctrl = oldpk;
1121 gomode = GO_NULL;
1122 GLCtext(0, 31, "Go To");
1123 lseg(GOTO_XL, GOTO_Y, GOTO_XR, GOTO_Y, 0);
1124 break;
1125 }
1126
1127 GLCcurs(G_OFF);
1128 setleds();
1129}
1130
1131/*
1132 =============================================================================
1133 newpps() -- send out new polyphonic pressure source value
1134 =============================================================================
1135*/
1136
1137void newpps(int16_t trg, int16_t grp, int16_t src, int16_t ival)
1138{
1139 register struct sment *smf, *smp;
1140 register uint16_t *fpu;
1141 register int32_t ltmp;
1142 register int16_t val;
1143 register int16_t vce;
1144 int16_t gs, oldi;
1145
1146 gs = (grp << 4) | src; /* calculate group/source index */
1147 fpu = io_fpu + FPU_OFNC; /* point at FPU base */
1148 valents[gs].val = ival; /* update value in table */
1149 smp = smf = (struct sment *)&valents[gs];
1150
1151
1152 while (smf NE (smp = smp->nxt)) { /* for each function ... */
1153
1154 vce = (smp->vp >> 4) & 0x0F; /* extract voice number */
1155
1156 if (vce2trg[vce] EQ trg) { /* for each key that matches ... */
1157
1158 switch (smp->vp & 0x000F) {
1159
1160 case 1: /* frq 1 */
1161 case 3: /* frq 2 */
1162 case 5: /* frq 3 */
1163 case 7: /* frq 4 */
1164
1165 val = ival >> 3;
1166 break;
1167
1168 case 10: /* filtr */
1169
1170 ltmp = ((int32_t)ival >> 1) + ((int32_t)ival >> 2);
1171
1172 if (ltmp > (int32_t)VALMAX)
1173 ltmp = (int32_t)VALMAX;
1174 else if (ltmp < (int32_t)VALMIN)
1175 ltmp = (int32_t)VALMIN;
1176
1177 val = (int16_t)ltmp;
1178 break;
1179
1180 default:
1181
1182 val = ival;
1183 }
1184
1185 oldi = setipl(FPU_DI);
1186
1187/* ++++++++++++++++++++++++++++ FPU interrupts disabled +++++++++++++++++++++ */
1188
1189 *(fpu + (smp->vp << 4) + FPU_TCV1) = val;
1190
1191 setipl(oldi);
1192
1193/* ++++++++++++++++++++++++++++ Interrupts restored +++++++++++++++++++++++++ */
1194
1195 }
1196 }
1197}
1198
1199/*
1200 =============================================================================
1201 newsv() -- send out new source value if it's changed
1202 =============================================================================
1203*/
1204
1205int16_t newsv(int16_t grp, int16_t src, int16_t ival)
1206{
1207 register struct sment *smf, *smp;
1208 register uint16_t *fpu;
1209 register int32_t ltmp;
1210 register int16_t val;
1211 register int16_t gs;
1212 register int16_t oldi;
1213 int16_t vmask, var;
1214
1215 gs = (grp << 4) | src; /* calculate grp/src index */
1216
1217 if (-1 NE (var = src2var[src])) { /* see if its a variable */
1218
1219 vmask = vmasks[anrs[var][grp]]; /* setup resolution mask */
1220
1221 /* see if we have a change in the selected significant bits */
1222
1223 if (((val = valents[gs].val) & vmask) EQ (ival & vmask)) {
1224
1225 /* make sure we always see a change to zero */
1226
1227 if (NOT ((ival EQ 0) AND val)) /* if not becoming zero */
1228 return(FALSE); /* ... it didn't change enough */
1229 }
1230 }
1231
1232 fpu = io_fpu + FPU_OFNC; /* point to FPU */
1233
1234 valents[gs].val = ival; /* update value in table */
1235
1236 smf = (struct sment *)&valents[gs]; /* point at value table */
1237 smp = smf;
1238
1239
1240 while (smf NE (smp = smp->nxt)) { /* update functions */
1241
1242 switch (smp->vp & 0x000F) {
1243
1244 case 1: /* frq 1 */
1245 case 3: /* frq 2 */
1246 case 5: /* frq 3 */
1247 case 7: /* frq 4 */
1248
1249 val = ival >> 3;
1250 break;
1251
1252 case 10: /* filtr */
1253
1254 ltmp = ((int32_t)ival >> 1) + ((int32_t)ival >> 2);
1255
1256 if (ltmp > (int32_t)VALMAX)
1257 ltmp = (int32_t)VALMAX;
1258 else if (ltmp < (int32_t)VALMIN)
1259 ltmp = (int32_t)VALMIN;
1260
1261 val = (int16_t)ltmp;
1262 break;
1263
1264 default:
1265
1266 val = ival;
1267 }
1268
1269 oldi = setipl(FPU_DI);
1270
1271/* ++++++++++++++++++++++++++++ FPU interrupts disabled +++++++++++++++++++++ */
1272
1273 *(fpu + (smp->vp << 4) + FPU_TCV1) = val;
1274
1275 setipl(oldi);
1276
1277/* ++++++++++++++++++++++++++++ Interrupts restored +++++++++++++++++++++++++ */
1278
1279 }
1280
1281 return(TRUE);
1282}
1283
1284/*
1285 =============================================================================
1286 setsv() -- unconditionally send out new source value
1287 =============================================================================
1288*/
1289
1290void setsv(int16_t grp, int16_t src, int16_t ival)
1291{
1292 register struct sment *smf, *smp;
1293 register uint16_t *fpu;
1294 register int32_t ltmp;
1295 register int16_t val;
1296 register int16_t gs;
1297 register int16_t oldi;
1298
1299 gs = (grp << 4) | src; /* calculate grp/src index */
1300 fpu = io_fpu + FPU_OFNC; /* point to FPU */
1301
1302 valents[gs].val = ival; /* update value in table */
1303
1304 smf = (struct sment *)&valents[gs]; /* point at value table */
1305 smp = smf;
1306
1307
1308 while (smf NE (smp = smp->nxt)) { /* update functions */
1309
1310 switch (smp->vp & 0x000F) {
1311
1312 case 1: /* frq 1 */
1313 case 3: /* frq 2 */
1314 case 5: /* frq 3 */
1315 case 7: /* frq 4 */
1316
1317 val = ival >> 3;
1318 break;
1319
1320 case 10: /* filtr */
1321
1322 ltmp = ((int32_t)ival >> 1) + ((int32_t)ival >> 2);
1323
1324 if (ltmp > (int32_t)VALMAX)
1325 ltmp = (int32_t)VALMAX;
1326 else if (ltmp < (int32_t)VALMIN)
1327 ltmp = (int32_t)VALMIN;
1328
1329 val = (int16_t)ltmp;
1330 break;
1331
1332 default:
1333
1334 val = ival;
1335 }
1336
1337 oldi = setipl(FPU_DI);
1338
1339/* ++++++++++++++++++++++++++++ FPU interrupts disabled +++++++++++++++++++++ */
1340
1341 *(fpu + (smp->vp << 4) + FPU_TCV1) = val;
1342
1343 setipl(oldi);
1344
1345/* ++++++++++++++++++++++++++++ Interrupts restored +++++++++++++++++++++++++ */
1346
1347 }
1348}
1349
1350/*
1351 =============================================================================
1352 l_prmtr() -- set parameter articulation status
1353 =============================================================================
1354*/
1355
1356void l_prmtr(int16_t stat, int16_t sig)
1357{
1358 if (NOT stat)
1359 return;
1360
1361 switch (sliders) {
1362
1363 case LS_PRMTR:
1364 case LS_OTHER:
1365 case LS_EQ:
1366
1367 sliders = LS_VOICE;
1368 swpt = &t_voice;
1369 break;
1370
1371 case LS_VOICE:
1372 default:
1373
1374 sliders = LS_PRMTR;
1375 swpt = &t_prmtr;
1376 break;
1377 }
1378
1379 lcdlbls();
1380 setleds();
1381}
1382
1383/*
1384 =============================================================================
1385 l_voice() -- set voice selection status
1386 =============================================================================
1387*/
1388
1389void l_voice(int16_t stat, int16_t vce)
1390{
1391 register int16_t ap, j, par;
1392 register uint16_t *fpu;
1393
1394 int8_t buf[8];
1395
1396 if (NOT stat)
1397 return;
1398
1399 articen[vce] = NOT articen[vce]; /* toggle voice enable */
1400
1401 sprintf(buf, "%c%2d %c", (articen[vce] ? '\176' : ' '), vce + 1,
1402 (articen[vce] ? '\177' : ' '));
1403
1404 GLCcurs(G_ON);
1405 GLCtext(0, (1 + (6 * vce)), buf);
1406 GLCcurs(G_OFF);
1407
1408 if (articen[vce]) { /* turn articulation on if voice is enabled */
1409
1410 for (ap = 0; ap < 14; ap++) {
1411
1412 par = arpar[ap];
1413 sendart(vce, par, lastart[par]);
1414 }
1415
1416 } else { /* ... or turn it off if voice is disabled */
1417
1418 fpu = io_fpu + FPU_OFNC + (vce << 8);
1419
1420 for (j = 1; j < 16; j++)
1421 *(fpu + (j << 4) + FPU_TSF2) = 0;
1422 }
1423}
1424
1425/*
1426 =============================================================================
1427 l_group() -- set group selection status
1428 =============================================================================
1429*/
1430
1431void l_group(int16_t stat, int16_t grp)
1432{
1433 int8_t buf[8];
1434
1435 if (NOT stat)
1436 return;
1437
1438 grpsel[grp] = NOT grpsel[grp]; /* toggle voice enable */
1439
1440 sprintf(buf, "%c%2d %c", (grpsel[grp] ? '\176' : ' '), grp + 1,
1441 (grpsel[grp] ? '\177' : ' '));
1442
1443 GLCcurs(G_ON);
1444 GLCtext(0, (1 + (6 * grp)), buf);
1445 GLCcurs(G_OFF);
1446}
1447
1448/*
1449 =============================================================================
1450 l_other -- set aux function status
1451 =============================================================================
1452*/
1453
1454void l_other(int16_t stat, int16_t sig)
1455{
1456 if (NOT stat)
1457 return;
1458
1459 sliders = LS_OTHER;
1460 swpt = &t_other;
1461
1462 lcdlbls();
1463}
1464
1465/*
1466 =============================================================================
1467 l_eq -- set eq mode
1468 =============================================================================
1469*/
1470
1471void l_eq(int16_t stat, int16_t sig)
1472{
1473 if (NOT stat)
1474 return;
1475
1476 if (sliders EQ LS_EQ) {
1477
1478 sliders = LS_PRMTR;
1479 swpt = &t_prmtr;
1480
1481 } else {
1482
1483 sliders = LS_EQ;
1484 swpt = &t_eq;
1485 }
1486
1487 lcdlbls();
1488}
1489
1490/*
1491 =============================================================================
1492 artclr() -- clear the articulation pot values
1493 =============================================================================
1494*/
1495
1496void artclr(void)
1497{
1498 register int16_t i;
1499
1500 for (i = 0; i < 14; i++)
1501 lastart[arpar[i]] = artitab[i];
1502}
1503
1504/*
1505 =============================================================================
1506 l_init() -- initialize articulation values (reset the sliders)
1507 =============================================================================
1508*/
1509
1510void l_init(int16_t stat, int16_t sig)
1511{
1512 register uint16_t *fpu;
1513 register int16_t barval, i, j;
1514 int8_t buf[16];
1515
1516 if (NOT stat)
1517 return;
1518
1519 fpu = io_fpu + FPU_OFNC;
1520
1521 switch (sliders) {
1522
1523 case LS_PRMTR:
1524 case LS_VOICE:
1525 case LS_INST:
1526 case LS_LIBR:
1527 case LS_NGRP:
1528 case LS_LOAD:
1529
1530 /* clear all but spares in voices 1..12 */
1531
1532 for (i = 0; i < 12; i++)
1533 for (j = 1; j < 16; j++)
1534 *(fpu + (i << 8) + (j << 4) + FPU_TSF2) = 0;
1535
1536 artclr();
1537
1538 for (i = 0; i < 14; i++) {
1539
1540 BGprmtr[i] = artitab[i];
1541
1542 if (BarType[i]) {
1543
1544 barval = (((artitab[i] >> 5) - 500) << 6) / 252;
1545 BarCset(i, barval);
1546
1547 } else {
1548
1549 barval = artitab[i] / 252;
1550 BarBset(i, barval);
1551 }
1552 }
1553
1554 break;
1555
1556 case LS_OTHER:
1557
1558 /* clear spares in voices 2..12 */
1559
1560 for (i = 1; i < 12; i++)
1561 *(fpu + (i << 8) + FPU_TSF2) = 0;
1562
1563 for (i = 0; i < 14; i++)
1564 BarBset(i, BGother[i] = 0);
1565
1566 break;
1567
1568 case LS_EQ:
1569
1570 for (i = 0; i < 14; i++) {
1571
1572 sendeq(i, gain2eq(0));
1573 BarCset(i, BGeq[i] = 0);
1574 }
1575
1576 break;
1577 }
1578}
1579
1580/*
1581 =============================================================================
1582 sendart() -- send out an articulation value
1583 =============================================================================
1584*/
1585
1586void sendart(int16_t vce, int16_t par, int16_t ival)
1587{
1588 register uint16_t *fpu;
1589 register int16_t val, oldi, mult;
1590 int16_t nop;
1591
1592 lastart[par] = ival;
1593
1594 fpu = io_fpu + FPU_OFNC + (vce << 8) + (par << 4);
1595 mult = 0x7FFF;
1596
1597 switch (par) {
1598
1599 case 1: /* freq 1 */
1600 case 3: /* freq 2 */
1601 case 5: /* freq 3 */
1602 case 7: /* freq 4 */
1603
1604 val = addpch(ival, 0);
1605 break;
1606
1607 case 10: /* filter */
1608
1609 val = ((ival >> 5) - 500) << 5;
1610 break;
1611
1612 case 2: /* level */
1613
1614 val = ival;
1615 mult = 0xFFFF;
1616 break;
1617
1618 case 4: /* location */
1619
1620 val = ((ival >> 5) - 500) << 5;
1621 mult = 0xFFFF;
1622 break;
1623
1624 default:
1625
1626 val = ival;
1627 }
1628
1629 oldi = setipl(FPU_DI);
1630
1631/* ++++++++++++++++++++++++++++ FPU interrupts disabled +++++++++++++++++++++ */
1632
1633 *(fpu + FPU_TCV2) = val;
1634 ++nop; ++nop; ++nop;
1635 *(fpu + FPU_TSF2) = mult;
1636
1637 setipl(oldi);
1638
1639/* ++++++++++++++++++++++++++++ Interrupts restored +++++++++++++++++++++++++ */
1640
1641}
1642
1643/*
1644 =============================================================================
1645 doslide() -- update a changed slider value
1646 =============================================================================
1647*/
1648
1649void doslide(void)
1650{
1651 register int16_t arp, bar, barval, i, slval;
1652
1653 slval = ART_VAL(aval); /* scaled articulation value */
1654 bar = asig - 25; /* bar number */
1655
1656 switch (sliders) {
1657
1658 case LS_PRMTR: /* parameter articulation */
1659 case LS_VOICE:
1660 case LS_INST:
1661 case LS_LIBR:
1662 case LS_NGRP:
1663 case LS_LOAD:
1664
1665 BGprmtr[bar] = slval;
1666 arp = arpar[bar];
1667
1668 for (i = 0; i < 12; i++)
1669 if (articen[i])
1670 sendart(i, arp, slval);
1671
1672 if (BarType[bar]) { /* center-zero bar */
1673
1674 barval = (((slval >> 5) - 500) << 6) / 252;
1675 BarCadj(bar, barval);
1676
1677 } else { /* bottom-zero bar */
1678
1679 barval = slval / 252;
1680 BarBadj(bar, barval);
1681 }
1682
1683 return;
1684
1685 case LS_OTHER: /* aux, dome, cv control */
1686
1687 switch (asig) {
1688
1689 case 26: /* aux mod */
1690 sendart(9, 0, slval);
1691 break;
1692
1693 case 27: /* depth */
1694 sendart(3, 0, slval);
1695 break;
1696
1697 case 28: /* rate */
1698 sendart(2, 0, slval);
1699 break;
1700
1701 case 29: /* intensity */
1702 sendart(1, 0, slval);
1703 break;
1704
1705 case 30: /* cv1 */
1706 sendart(11, 0, slval);
1707 break;
1708
1709 case 31: /* cv2 */
1710 sendart(10, 0, slval);
1711 break;
1712
1713 case 32: /* cv3 */
1714 sendart(6, 0, slval);
1715 break;
1716
1717 case 33: /* cv4 */
1718 sendart(8, 0, slval);
1719 break;
1720
1721 default:
1722 slval = 0; /* force unused pots to stay zero */
1723 break;
1724 }
1725
1726 BGother[bar] = slval;
1727 barval = slval / 252;
1728 BarBadj(bar, barval);
1729
1730 return;
1731
1732
1733 case LS_EQ: /* eq control */
1734
1735 barval = (((slval >> 5) - 500) << 6) / 252;
1736 BGeq[bar] = barval;
1737 sendeq(bar, gain2eq(SL2GAIN(slval)));
1738 BarCadj(bar, barval);
1739
1740 return;
1741
1742 default:
1743 return;
1744 }
1745}
1746
1747/*
1748 =============================================================================
1749 settmpo() -- set the tempo
1750 =============================================================================
1751*/
1752
1753void settmpo(int16_t val)
1754{
1755 register int16_t timeval;
1756
1757 tmpoval = val;
1758 timeval = ( ( (tmpomlt + 50) * tmpoval) / 100);
1759 timeval = (int16_t)( (192000L / timeval) - 1);
1760 TIME_T2H = timeval >> 8;
1761 TIME_T2L = timeval & 0x00FF;
1762}
1763
1764/*
1765 =============================================================================
1766 settune() -- send the fine tuning from tuneval to the FPU
1767 =============================================================================
1768*/
1769
1770void settune(void)
1771{
1772 register int16_t oldi, i, grp;
1773 register uint16_t *fpu;
1774 register int32_t trval, trmax;
1775 int16_t nop;
1776
1777 trmax = PCHMAX;
1778
1779 oldi = setsr(0x2200);
1780
1781/* +++++++++++++++++++++++ FPU interrupts disabled ++++++++++++++++++++++++++ */
1782
1783 for (i = 0; i < 12; i++) {
1784
1785 if (-1 NE (grp = vce2grp[i])) {
1786
1787 trval = (int32_t)tuneval + ((int32_t)s_trns[grp - 1] << 1);
1788
1789 if (trval > trmax)
1790 trval = trmax;
1791
1792 } else {
1793
1794 trval = (int32_t)tuneval;
1795 }
1796
1797 fpu = io_fpu + FPU_OFNC + (i << 8) + 0x0010; /* freq 1 */
1798
1799 *(fpu + FPU_TCV3) = (uint16_t)(0x0000FFFFL & trval);
1800 ++nop; ++nop; ++nop;
1801 *(fpu + FPU_TSF3) = 0x7FFF;
1802 }
1803
1804 setsr(oldi);
1805
1806/* ++++++++++++++++++++++++++++ Interrupts restored +++++++++++++++++++++++++ */
1807
1808}
1809
Note: See TracBrowser for help on using the repository browser.