source: buchla-68k/ram/puteq.c@ 7258c6a

Last change on this file since 7258c6a was 7258c6a, checked in by Thomas Lopatic <thomas@…>, 8 years ago

Use standard integer types.
  • Property mode set to 100644
File size: 4.1 KB
Line 
1/*
2 =============================================================================
3 puteq.c -- output functions for the LMC835 EQ chip on the Buchla 700
4 Version 3 -- 1987-12-10 -- D.N. Lynx Crowe
5 =============================================================================
6*/
7
8#define TESTER 0
9
10#if TESTER
11
12#include "ascii.h"
13#include "biosdefs.h"
14#include "ctype.h"
15#include "rawio.h"
16
17#define MAXLINE 4
18
19#endif
20
21#include "hwdefs.h"
22#include "stddefs.h"
23
24#define EQ_STB 0x04
25#define EQ_DAT 0x08
26#define EQ_CLK 0x10
27
28#define EQ_IDL (EQ_STB | EQ_CLK)
29#define EQ_MASK (EQ_STB | EQ_CLK | EQ_DAT)
30
31#define EQ_A6DB 0x20
32#define EQ_B6DB 0x10
33
34#define EQ_6DB (EQ_A6DB | EQ_B6DB)
35
36#define EQ_ADD 0x40
37
38#define PSG_ADDR 0
39#define PSG_READ 0
40#define PSG_WRIT 2
41
42#define PSG_IOEN 7
43#define PSG_IDLE 0xBF
44
45#define PSG_PRTB 15
46
47/*
48
49*/
50
51#if TESTER
52char cmdline[32];
53#endif
54
55int8_t eqgaint[] = {
56
57 0x00, /* 0 db */
58 0x20, /* 1 db */
59 0x10, /* 2 db */
60 0x08, /* 3 db */
61 0x04, /* 4 db */
62 0x02, /* 5 db */
63 0x12, /* 6 db */
64 0x2A, /* 7 db */
65 0x16, /* 8 db */
66 0x01, /* 9 db */
67 0x29, /* 10 db */
68 0x2D, /* 11 db */
69 0x2F /* 12 db */
70};
71
72/*
73
74*/
75
76void puteq(int8_t byte)
77{
78 register int16_t i;
79 register int8_t *psg;
80 register int8_t eqdata;
81
82 psg = &io_tone;
83
84 *(psg + PSG_ADDR) = PSG_IOEN; /* setup PSG I/O controls */
85 *(psg + PSG_WRIT) = PSG_IDLE;
86
87 *(psg + PSG_ADDR) = PSG_PRTB; /* setup EQ control lines */
88 eqdata = EQ_IDL | (*(psg + PSG_READ) & ~EQ_MASK);
89
90 for (i = 0; i < 8; i++) { /* send out 8 bits */
91
92 if (byte & 1) /* setup data line from LSB */
93 eqdata |= EQ_DAT; /* "1" */
94 else
95 eqdata &= ~EQ_DAT; /* "0" */
96
97 eqdata &= ~EQ_CLK; /* set clock low */
98
99 *(psg + PSG_ADDR) = PSG_PRTB;
100 *(psg + PSG_WRIT) = eqdata;
101
102 eqdata |= EQ_CLK; /* set clock high */
103
104 *(psg + PSG_ADDR) = PSG_PRTB;
105 *(psg + PSG_WRIT) = eqdata;
106
107 byte >>= 1; /* shift next bit into LSB */
108 }
109
110 eqdata &= ~EQ_STB; /* set strobe low */
111
112 *(psg + PSG_ADDR) = PSG_PRTB;
113 *(psg + PSG_WRIT) = eqdata;
114
115 eqdata |= EQ_STB; /* set strobe high */
116
117 *(psg + PSG_ADDR) = PSG_PRTB;
118 *(psg + PSG_WRIT) = eqdata;
119}
120
121/*
122
123*/
124
125void sendeq(int8_t band, int8_t gain)
126{
127 puteq(band);
128 puteq(gain);
129}
130
131int8_t gain2eq(int16_t gain)
132{
133 register int8_t eqdat;
134
135 if (gain > 0)
136 eqdat = eqgaint[gain] | EQ_ADD;
137 else
138 eqdat = eqgaint[-gain];
139
140 return(eqdat);
141}
142
143/*
144
145*/
146
147#if TESTER
148
149extern int xtrap15();
150
151char ahex[] = "0123456789abcdefABCDEF";
152
153/*
154 ============================================================================
155 xdtoi -- convert hex ASCII to an int digit
156 ============================================================================
157*/
158
159int
160xdtoi(c)
161register int c;
162{
163 register int i;
164 register char *ap = &ahex[0];
165
166 for (i = 0; i < 22; i++)
167 if (c EQ *ap++)
168 if (i >15)
169 return(i - 6);
170 else
171 return(i);
172
173 return(-1);
174}
175
176/*
177
178*/
179
180main()
181{
182 short rc, c, j;
183 register long temp;
184 char gain, band;
185 register char *aptr;
186
187 printf("\n\nBuchla 700 EQ chip test -- Enter data in hex\n\n");
188
189 do {
190
191 printf("Band = ");
192
193 rc = getln(CON_DEV, MAXLINE, cmdline);
194
195 if (rc EQ A_CR) {
196
197 printf("\n");
198
199 temp = 0L;
200 aptr = cmdline;
201
202 if (A_CR EQ (*aptr & 0x00FF)) {
203
204 xtrap15();
205 continue;
206 }
207
208 if (CTL('G') EQ (*aptr & 0x00FF)) {
209
210 while (0 EQ BIOS(B_RDAV, CON_DEV))
211 sendeq(band, gain);
212
213 BIOS(B_GETC, CON_DEV);
214 continue;
215 }
216
217 while (isxdigit(c = *aptr++))
218 temp = (temp << 4) + xdtoi(c);
219
220 if (temp > 255) {
221
222 printf("\nInput must be < 100\n\n");
223 continue;
224 }
225
226 band = (char)(temp & 0x000000FFL);
227
228 } else {
229
230 printf("Huh ?\n\n");
231 continue;
232 }
233/*
234
235*/
236 printf("Gain = ");
237
238 rc = getln(CON_DEV, MAXLINE, cmdline);
239
240 if (rc EQ A_CR) {
241
242 printf("\n");
243
244 temp = 0L;
245 aptr = cmdline;
246
247 if (A_CR EQ (*aptr & 0x00FF)) {
248
249 xtrap15();
250 continue;
251 }
252
253 while (isxdigit(c = *aptr++))
254 temp = (temp << 4) + xdtoi(c);
255
256 if (temp > 255) {
257
258 printf("\nInput must be < 100\n\n");
259 continue;
260 }
261
262 gain = (char)(temp & 0x000000FFL);
263
264 } else {
265
266 printf("Huh ?\n\n");
267 continue;
268 }
269
270 sendeq(band, gain);
271 printf("\n");
272
273 } while (1);
274}
275
276#endif
Note: See TracBrowser for help on using the repository browser.