Context Navigation

serintr.s

Last change on this file was 8325447, checked in by Thomas Lopatic <thomas@…>, 7 years ago
Removed _ prefix.
Property mode set to `100644`
File size: 15.3 KB

Rev	Line
[4f508e6]	1	\| ------------------------------------------------------------------------------
	2	\| serintr.s -- MIDAS-VII serial I/O subroutines
	3	\| Version 4 -- 1988-12-13 -- D.N. Lynx Crowe
	4
	5	\| These subroutines replace those in bios.s in order to add support for
	6	\| MIDAS-VII foot pedal and pulse inputs, and pulse outputs.
	7
	8	\| WARNING: The code below uses addresses in the bios RAM area. These addresses
	9	\| correspond to those in PROMS dated 1988-06-20 et seq. If the bios is changed,
	10	\| the addresses marked with <== may have to be changed.
	11	\| ------------------------------------------------------------------------------
	12
[f40a309]	13	.text
[4f508e6]	14
[8325447]	15	.xdef setsio
[4f508e6]	16
[8325447]	17	.xdef foot1
	18	.xdef foot2
	19	.xdef pulse1
	20	.xdef pulse2
[4f508e6]	21
[f40a309]	22	.xdef serintr
[4f508e6]	23
[f40a309]	24	.xdef serint
	25	.xdef midint
[4f508e6]	26
[f40a309]	27	.xdef wrapin
	28	.xdef wrapout
[4f508e6]	29
[f40a309]	30	.xdef serput
	31	.xdef midput
[4f508e6]	32
[f40a309]	33	.xdef rtschk
[4f508e6]	34
[f40a309]	35	.xdef rtson
	36	.xdef rtsoff
[4f508e6]	37
	38	\| ==============================================================================
	39
	40	\| The following addresses, marked by <==, are bios version dependent:
	41
	42	RAM = 0x00000400 \| Beginning of system RAM area <==
	43
	44	SR1IOREC = RAM+0x0AB0 \| Serial-1 iorec structure <==
	45	SR2IOREC = RAM+0x0AD8 \| Serial-2 iorec structure <==
	46	MC1IOREC = RAM+0x0B00 \| MIDI-1 iorec structure <==
	47	MC2IOREC = RAM+0x0B28 \| MIDI-2 iorec structure <==
	48
	49	\| End of bios version dependent addresses.
	50
	51	\| ==============================================================================
	52
[f40a309]	53	.page
[4f508e6]	54
	55	SERVECT = 0x000074 \| Level 5 interrupt autovector address
	56
	57	IPL7 = 0x0700 \| IPL 7 value for sr
	58
	59	\| ACIA I/O Addresses:
	60	\| -------------------
	61	SR1ACIA = 0x3A8001 \| Serial-1 ACIA base address
	62	SR2ACIA = 0x3A8009 \| Serial-2 ACIA base address
	63	MC1ACIA = 0x3AC001 \| MIDI-1 ACIA base address
	64	MC2ACIA = 0x3AC009 \| MIDI-2 ACIA base address
	65
	66	\| ACIA Register offsets:
	67	\| ----------------------
	68	ACIA_IER = 0 \| ACIA IER offset
	69	ACIA_ISR = 0 \| ACIA ISR offset
	70	ACIA_CSR = 2 \| ACIA CSR offset
	71	ACIA_CFR = 2 \| ACIA CFR offset
	72	ACIA_TBR = 4 \| ACIA TBR offset
	73	ACIA_TDR = 6 \| ACIA TDR offset
	74	ACIA_RDR = 6 \| ACIA RDR offset
	75
	76	\| iorec structure definitions:
	77	\| ----------------------------
	78	IORECLN = 40 \| Length of an iorec structure
	79
	80	ibuf = 0 \| Input buffer base address
	81	ibufsize = 4 \| Input buffer size (bytes)
	82	ibufhd = 6 \| Input buffer head index
	83	ibuftl = 8 \| Input buffer tail index
	84	ibuflow = 10 \| Input buffer low water mark
	85	ibufhi = 12 \| Input buffer high water mark
	86	obuf = 14 \| Output buffer base address
	87	obufsize = 18 \| Output buffer size (bytes)
	88	obufhd = 20 \| Output buffer head index
	89	obuftl = 22 \| Output buffer tail index
	90	obuflow = 24 \| Output buffer low water mark
	91	obufhi = 26 \| Output buffer high water mark
	92	cfr0 = 28 \| ACIA CFR, MS bit = 0
	93	cfr1 = 29 \| ACIA CFR, MS bit = 1
	94	flagxon = 30 \| XON flag (non-zero = XOFF sent)
	95	flagxoff = 31 \| XOFF flag (non-zero = active)
	96	linedisc = 32 \| Line discipline flags
	97	erbyte = 33 \| Last error byte
	98	isr = 34 \| ACIA ISR on interrupt
	99	csr = 35 \| ACIA CSR on interrupt
	100	errct = 36 \| Error count (FRM/OVR/BRK)
	101	ibfct = 38 \| Input buffer full count
	102
[f40a309]	103	.page
[4f508e6]	104
	105	\| serintr -- Serial (Serial-1, Serial-2, MIDI-1, MIDI-2) interrupt handler
	106	\| ------- -------------------------------------------------------------
	107	serintr: movem.l d0-d3/a0-a2,-(a7) \| Save registers
	108	lea SR1IOREC,a0 \| Point at Serial-1 iorec
	109	lea SR1ACIA,a1 \| Point at Serial-1 ACIA
[8325447]	110	movea.l foot1,a2 \| Point at foot sw. 1 processor
[4f508e6]	111	bsr serint \| Go process (possible) int.
	112
	113	lea SR2IOREC,a0 \| Point at Serial-2 iorec
	114	lea SR2ACIA,a1 \| Point at Serial-2 ACIA
[8325447]	115	movea.l foot2,a2 \| Point at foot sw. 2 processor
[4f508e6]	116	bsr serint \| Go process (possible) int.
	117
	118	lea MC1IOREC,a0 \| Point at MIDI-1 iorec
	119	lea MC1ACIA,a1 \| Point at MIDI-1 ACIA
[8325447]	120	movea.l pulse1,a2 \| Point at pulse 1 processor
[4f508e6]	121	bsr midint \| Go process (possible) int.
	122
	123	lea MC2IOREC,a0 \| Point at MIDI-2 iorec
	124	lea MC2ACIA,a1 \| Point at MIDI-2 ACIA
[8325447]	125	movea.l pulse2,a2 \| Point at pulse 2 processor
[4f508e6]	126	bsr midint \| Go process (possible) int.
	127
	128	movem.l (a7)+,d0-d3/a0-a2 \| Restore registers
	129	rte \| Return from exception
	130
[f40a309]	131	.page
[4f508e6]	132
	133	\| serint -- Process an interrupt from Serial-1 or Serial-2
	134	\| ------ ----------------------------------------------
	135	serint: move.b ACIA_ISR(a1),isr(a0) \| Get and save ISR
	136	move.b ACIA_CSR(a1),csr(a0) \| Get and save CSR
	137
	138	btst.b #7,isr(a0) \| Was int for this device ?
	139	beq serintx \| Jump if not
	140
	141	serchk: btst.b #1,isr(a0) \| FRM/OVR/BRK error ?
	142	bne sererr \| Jump if so
	143
	144	btst.b #0,isr(a0) \| Receiver interrupt ?
	145	bne serrx \| Jump if so
	146
	147	sertxq: btst.b #6,isr(a0) \| Transmitter interrupt ?
	148	bne sertx \| Jump if so
	149
	150	serctq: btst.b #5,isr(a0) \| CTS interrupt ?
	151	bne sercts \| Jump if so
	152
	153	serintx: btst.b #4,isr(a0) \| DCD interrupt ?
	154	bne calldcd \| Jump if so
	155
	156	serdone: rts \| Return to caller
	157
	158	calldcd: move.b csr(a0),d0 \| Get CSR interrupt status
	159	btst.l #4,d0 \| Check DCD input (0 = active)
	160	bne calldcd0 \| Jump if line was inactive
	161
	162	moveq.l #1,d0 \| Set footswitch status to TRUE
	163	bra calldcd1 \| ...
	164
	165	calldcd0: moveq.l #0,d0 \| Set footswitch status to FALSE
	166
	167	calldcd1: move.w d0,-(a7) \| Call the footswitch processor
[84c0125]	168	jsr (a2) \| ... (*footX)(status)
[4f508e6]	169	tst.w (a7)+ \| ...
	170	rts \| Return to caller
	171
[f40a309]	172	.page
[4f508e6]	173
	174	\| Handle serial I/O port error
	175
	176	sererr: addq.w #1,errct(a0) \| Update error count
	177	move.b ACIA_RDR(a1),erbyte(a0) \| Get error byte
	178	rts \| Return to caller
	179
	180
	181	\| Handle CTS interupt
	182
	183	sercts: btst.b #1,linedisc(a0) \| RTS/CTS mode ?
	184	beq serintx \| Ignore if not
	185
	186	btst.b #5,csr(a0) \| CTS set ?
	187	beq serintx \| Ignore if not
	188
	189	sercts1: btst.b #6,isr(a0) \| TDRE set ?
	190	beq sercts1 \| Loop until it is (!)
	191
	192	move.w obufhd(a0),d2 \| Head index to d2
	193	cmp.w obuftl(a0),d2 \| Compare to tail index
	194	beq serintx \| Done if buffer empty
	195
	196	bsr wrapout \| Adjust pointer for wraparound
	197	move.l obuf(a0),a2 \| Get buffer base in a2
	198	move.b 0(a2,d2),ACIA_TDR(a1) \| Send byte on its way
	199	move.w d2,obufhd(a0) \| Save updated head index
	200	bra serintx \| Done
	201
[f40a309]	202	.page
[4f508e6]	203
	204	\| Handle receiver interrupt
	205
	206	serrx: btst.b #1,linedisc(a0) \| RTS/CTS mode set ?
	207	beq serrx1 \| Jump if not
	208
	209	bsr rtsoff \| Turn off RTS
	210
	211	serrx1: move.b ACIA_RDR(a1),d0 \| Read data from ACIA
	212	btst.b #1,linedisc(a0) \| RTS/CTS mode set ?
	213	bne serrx3 \| Jump if so
	214
	215	btst.b #0,linedisc(a0) \| XON/XOFF mode set ?
	216	beq serrx3 \| Jump if not
	217
	218	cmpi.b #0x11,d0 \| Is this an XON ?
	219	bne serrx2 \| Jump if not
	220
	221	move.b #0x00,flagxoff(a0) \| Clear flagxoff
	222	bra sertxq \| Done
	223
	224	serrx2: cmpi.b #0x13,d0 \| Is this an XOFF ?
	225	bne serrx3 \| Jump if not
	226
	227	move.b #0xFF,flagxoff(a0) \| Set flagxoff
	228	bra sertxq \| Done
	229
	230	serrx3: move.w ibuftl(a0),d1 \| Get tail index in d1
	231	bsr wrapin \| Adjust for wraparound
	232	cmp.w ibufhd(a0),d1 \| Head = tail ?
	233	beq seribf \| If so, we drop the character
	234
[f40a309]	235	.page
[4f508e6]	236	move.l ibuf(a0),a2 \| Get buffer address
	237	move.b d0,0(a2,d1) \| Stash byte in buffer
	238	move.w d1,ibuftl(a0) \| Save updated tail index
	239	move.w ibuftl(a0),d2 \| Tail index to d2
	240	move.w ibufhd(a0),d3 \| Head index to d3
	241	cmp.w d3,d2 \| Head > Tail ?
	242	bhi rsi_1 \| Jump if not
	243
	244	add.w ibufsize(a0),d2 \| Add buffer size to tail index
	245
	246	rsi_1: sub.w d3,d2 \| Length = (adjusted)Tail - Head
	247	cmp.w ibufhi(a0),d2 \| Hit high water mark ?
	248	bne serrx4 \| Jump if not
	249
	250	btst.b #1,linedisc(a0) \| RTS/CTS mode set ?
	251	bne sertxq \| Done if so
	252
	253	btst.b #0,linedisc(a0) \| XON/XOFF mode set ?
	254	beq serrx4 \| Jump if not
	255
	256	tst.b flagxon(a0) \| XOFF already sent ?
	257	bne serrx4 \| Jump if so
	258
	259	move.b #0xFF,flagxon(a0) \| Set the flag
	260	move.b #0x13,d1 \| Send an XOFF
	261	bsr serput \| ...
	262
	263	serrx4: btst #1,linedisc(a0) \| RTS/CTS mode set ?
	264	beq sertxq \| Done if not
	265
	266	bsr rtson \| Turn on RTS
	267	bra sertxq \| Done
	268
[f40a309]	269	.page
[4f508e6]	270
	271	\| Handle transmitter interrupt
	272
	273	sertx: btst.b #1,linedisc(a0) \| RTS/CTS mode set ?
	274	bne sertx2 \| If so, go check CTS
	275
	276	btst.b #0,linedisc(a0) \| XON/XOFF mode set ?
	277	beq sertx1 \| Jump if not
	278
	279	tst.b flagxoff(a0) \| Check flagxoff
	280	bne serctq \| Done if set
	281
	282	sertx1: move.w obufhd(a0),d2 \| Head index to d2
	283	cmp.w obuftl(a0),d2 \| Compare to tail index
	284	beq serctq \| Done if buffer empty
	285
	286	bsr wrapout \| Adjust pointer for wraparound
	287	move.l obuf(a0),a2 \| Get buffer base address
	288	move.b 0(a2,d2),ACIA_TDR(a1) \| Send byte on its way
	289	move.w d2,obufhd(a0) \| Save updated head index
	290	bra serctq \| Done
	291
	292	sertx2: btst.b #5,csr(a0) \| CTS set in csr ?
	293	beq serctq \| If not, go check for CTS int
	294
	295	bra sertx1 \| CTS was set, go transmit
	296
	297	seribf: move.b d0,erbyte(a0) \| Log dropped character
	298	addq.w #1,ibfct(a0) \| ...
	299	bra sertxq \| Go check Tx interrupt
	300
[f40a309]	301	.page
[4f508e6]	302
	303	\| midint -- Process an interrupt from MIDI-1 or MIDI-2
	304	\| ------ ------------------------------------------
	305	midint: move.b ACIA_ISR(a1),isr(a0) \| Get and save ISR
	306	move.b ACIA_CSR(a1),csr(a0) \| Get and save CSR
	307
	308	btst.b #7,isr(a0) \| Was int for this device ?
	309	beq midintx \| Jump if not
	310
	311	midchk: btst.b #1,isr(a0) \| FRM/OVR/BRK error ?
	312	bne miderr \| Jump if so
	313
	314	btst.b #0,isr(a0) \| Receiver interrupt ?
	315	bne midrx \| Jump if so
	316
	317	midtxq: btst.b #6,isr(a0) \| Transmitter interrupt ?
	318	bne midtx \| Jump if so
	319
	320	midintx: btst #4,isr(a0) \| DCD interrupt ?
	321	bne mididcd \| Jump if so
	322
	323	mididone: rts \| Return to caller
	324
	325	mididcd: jmp (a2) \| Exit through the DCD processor
	326
	327	miderr: addq.w #1,errct(a0) \| Update error count
	328	move.b ACIA_RDR(a1),erbyte(a0) \| Get error byte
[f40a309]	329	rts
[4f508e6]	330
	331	\| Handle receiver interrupt
	332
	333	midrx: move.b ACIA_RDR(a1),d0 \| Read data from ACIA
	334	move.w ibuftl(a0),d1 \| Get tail index in d1
	335	bsr wrapin \| Adjust for wraparound
	336	cmp.w ibufhd(a0),d1 \| Head = tail ?
	337	beq midibf \| If so, we drop the character
	338
	339	move.l ibuf(a0),a2 \| Get buffer address
	340	move.b d0,0(a2,d1) \| Stash byte in buffer
	341	move.w d1,ibuftl(a0) \| Save updated tail index
	342	bra midtxq \| Done (go check tx int)
	343
[f40a309]	344	.page
[4f508e6]	345
	346	\| Handle transmitter interrupt
	347
	348	midtx: move.w obufhd(a0),d2 \| Head index to d2
	349	cmp.w obuftl(a0),d2 \| Compare to tail index
	350	beq midintx \| Done if buffer empty
	351
	352	bsr wrapout \| Adjust pointer for wraparound
	353	move.l obuf(a0),a2 \| Get buffer base address
	354	move.b 0(a2,d2),ACIA_TDR(a1) \| Send byte on its way
	355	move.w d2,obufhd(a0) \| Save updated head index
	356	bra midintx \| Done
	357
	358	midibf: move.b d0,erbyte(a0) \| Log dropped character
	359	addq.w #1,ibfct(a0) \| ...
	360	bra midtxq \| Go check Tx interrupt
	361
[f40a309]	362	.page
[4f508e6]	363
	364	\| serput -- Output a character to a serial port
	365	\| ------ -----------------------------------
	366	serput: move.w sr,-(a7) \| Save status register
	367	ori.w #IPL7,sr \| DISABLE INTERRUPTS
	368	move.b ACIA_ISR(a1),isr(a0) \| Get ACIA isr
	369	move.b ACIA_CSR(a1),csr(a0) \| Get ACIA csr
	370	btst #0,linedisc(a0) \| XON/XOFF mode ?
	371	beq serpt_1 \| Jump if not
	372
	373	tst.b flagxoff(a0) \| XON active ?
	374	bne serpt_2 \| Jump if so
	375
	376	serpt_1: btst.b #6,isr(a0) \| Is ACIA still sending ?
	377	beq serpt_2 \| Jump if so
	378
	379	move.w obufhd(a0),d2 \| Head index to d2
	380	cmp.w obuftl(a0),d2 \| Compare to tail index
	381	bne serpt_2 \| Jump if buffer not empty
	382
	383	move.b d1,ACIA_TDR(a1) \| Give byte to ACIA to send
	384	bra serpt_3 \| Go deal with RTS/CTS if needed
	385
	386	serpt_2: move.w obuftl(a0),d2 \| Tail index to d2
	387	bsr wrapout \| Adjust for wraparound
	388	cmp.w obufhd(a0),d2 \| Compare to head index
	389	beq serpt_4 \| Jump if buffer full
	390
	391	move.l obuf(a0),a2 \| Get buffer base address in a2
	392	move.b d1,0(a2,d2) \| Put character in buffer
	393	move.w d2,obuftl(a0) \| Update buffer tail index
	394
	395	serpt_3: bsr serchk \| Check status on our way out
	396	bsr rtschk \| Handle RTS protocol
	397	move.w (a7)+,sr \| RESTORE INTERRUPTS
	398	andi #0xFFFE,sr \| Clear carry flag = OK
	399	rts \| Return to caller
	400
	401	serpt_4: bsr serchk \| Check status on our way out
	402	bsr rtschk \| Handle RTS protocol
	403	move.w (a7)+,sr \| RESTORE INTERRUPTS
	404	ori #0x0001,sr \| Set carry flag = buffer full
	405	rts \| Return to caller
	406
[f40a309]	407	.page
[4f508e6]	408
	409	\| midput -- Output to MIDI
	410	\| ------ --------------
	411	midput: move.w sr,-(a7) \| Save status register
	412	ori.w #IPL7,sr \| DISABLE INTERRUPTS
	413	move.b ACIA_ISR(a1),isr(a0) \| Get ACIA isr
	414	move.b ACIA_CSR(a1),csr(a0) \| Get ACIA csr
	415	btst.b #6,isr(a0) \| Is ACIA still sending ?
	416	beq midpt_2 \| Jump if so
	417
	418	move.w obufhd(a0),d2 \| Head index to d2
	419	cmp.w obuftl(a0),d2 \| Compare to tail index
	420	bne midpt_2 \| Jump if buffer not empty
	421
	422	move.b d1,ACIA_TDR(a1) \| Give byte to ACIA to send
	423	bra midpt_3 \| Go set final status and exit
	424
	425	midpt_2: move.w obuftl(a0),d2 \| Tail index to d2
	426	bsr wrapout \| Adjust for wraparound
	427	cmp.w obufhd(a0),d2 \| Compare to head index
	428	beq midpt_4 \| Jump if buffer full
	429
	430	move.l obuf(a0),a2 \| Get buffer base address in a2
	431	move.b d1,0(a2,d2) \| Put character in buffer
	432	move.w d2,obuftl(a0) \| Update buffer tail index
	433
	434	midpt_3: bsr midchk \| Check status on our way out
	435	move.w (a7)+,sr \| RESTORE INTERRUPTS
	436	andi #0xFFFE,sr \| Clear carry flag = OK
	437	rts \| Return to caller
	438
	439	midpt_4: bsr midchk \| Check status on our way out
	440	move.w (a7)+,sr \| RESTORE INTERRUPTS
	441	ori #0x0001,sr \| Set carry flag = buffer full
	442	rts \| Return to caller
	443
[f40a309]	444	.page
[4f508e6]	445
	446	\| rtschk -- Check RTS mode and turn on RTS if it's enabled
	447	\| ------ ----------------------------------------------
	448	rtschk: btst #1,linedisc(a0) \| RTS/CTS mode set ?
	449	beq rtsexit \| Jump to exit if not
	450
	451	\| rtson -- Turn on RTS line
	452	\| ----- ----------------
	453	rtson: move.b cfr1(a0),d0 \| Pick up CFR1 image
	454	bclr #0,d0 \| Turn on RTS line (0 = on)
	455	bra rtscmn \| Join common RTS code below
	456
	457	\| rtsoff -- Turn off RTS line
	458	\| ------ -----------------
	459	rtsoff: move.b cfr1(a0),d0 \| Pick up CFR1 image
	460	bset #0,d0 \| Turn off RTS line (1 = off)
	461
	462	rtscmn: bset #7,d0 \| Make sure MS bit is set
	463	move.b d0,cfr1(a0) \| Update CFR1 image
	464	move.b d0,ACIA_CFR(a1) \| Send CFR to hardware
	465
	466	rtsexit: rts \| Return to caller
	467
[f40a309]	468	.page
[4f508e6]	469
	470	\| wrapin -- Check input pointer for wraparound
	471	\| ------ ----------------------------------
	472	wrapin: add.w #1,d1 \| Head index +1
	473	cmp.w ibufsize(a0),d1 \| = buffer size ?
	474	bcs wrapin1 \| Jump if not
	475
	476	moveq.l #0,d1 \| Wraparound
	477
	478	wrapin1: rts \| Return to caller
	479
	480	\| wrapout -- Check output pointer for wraparound
	481	\| ------- -----------------------------------
	482	wrapout: addq.w #1,d2 \| Tail index +1
	483	cmp.w obufsize(a0),d2 \| = buffer size ?
	484	bcs wrapout1 \| Jump if not
	485
	486	moveq.l #0,d2 \| Wrap around if so
	487
	488	wrapout1: rts \| Return to caller
	489
[f40a309]	490	.page
[4f508e6]	491
[8325447]	492	\| setsio -- setsio() -- initialize serial I/O vectors and DCD interrupts
	493	\| ------ ------------------------------------------------------------
	494	setsio: move.w sr,-(a7) \| Preserve status register
[4f508e6]	495	ori.w #IPL7,sr \| DISABLE INTERRUPTS
	496
	497	lea nulsiox,a0 \| Get null return address
[8325447]	498	move.l a0,foot1 \| Initialize foot1 vector
	499	move.l a0,foot2 \| Initialize foot2 vector
	500	move.l a0,pulse1 \| Initialize pulse1 vector
	501	move.l a0,pulse2 \| Initialize pulse2 vector
[4f508e6]	502
	503	lea SR1ACIA,a1 \| Point at Serial-1 ACIA
	504	move.b #0x90,ACIA_IER(a1) \| Enable DCD interrupts
	505
	506	lea SR2ACIA,a1 \| Point at Serial-2 ACIA
	507	move.b #0x90,ACIA_IER(a1) \| Enable DCD interrupts
	508
	509	lea MC1ACIA,a1 \| Point at MIDI-1 ACIA
	510	move.b #0x90,ACIA_IER(a1) \| Enable DCD interrupts
	511
	512	lea MC2ACIA,a1 \| Point at MIDI-2 ACIA
	513	move.b #0x90,ACIA_IER(a1) \| Enable DCD interrupts
	514
	515	lea serintr,a0 \| Initialize interrupt vector
	516	move.l a0,SERVECT \| ... in processor RAM
	517
	518	move.w (a7)+,sr \| RESTORE INTERRUPTS
	519
	520	nulsiox: rts \| Return to caller
	521
[f40a309]	522	.bss
[4f508e6]	523
	524	\| DCD interrupt processor vectors
	525	\| -------------------------------
[8325447]	526	foot1: .ds.l 1 \| short (*foot1)();
	527	foot2: .ds.l 1 \| short (*foot2)();
	528	pulse1: .ds.l 1 \| short (*pulse1)();
	529	pulse2: .ds.l 1 \| short (*pulse2)();
[4f508e6]	530
[f40a309]	531	.end

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format