source: buchla-68k/ram/sqselbx.c@ b28a12e

Last change on this file since b28a12e was b28a12e, checked in by Thomas Lopatic <thomas@…>, 8 years ago

Zero redundant declarations.
  • Property mode set to 100644
File size: 13.0 KB
RevLine 
[f40a309]1/*
2 =============================================================================
3 sqselbx.c -- MIDAS-VII sequence editor box selection functions
4 Version 19 -- 1988-11-18 -- D.N. Lynx Crowe
5 =============================================================================
6*/
7
[b28a12e]8#include "ram.h"
[e225e77]9
[f40a309]10#define ST_0 0x01 /* initial Action 1 or Action 2*/
11#define ST_1 0x02 /* operand type */
12#define ST_2 0x04 /* initial Action 3*/
13
14#define ST_OFF 0x00 /* cancel highlighting */
15
[7258c6a]16int16_t action; /* current action column */
17int16_t sqdeflg; /* sequence data entry buffer filled */
18int16_t sqmenu; /* sqeuence submenu state */
[f40a309]19
[7258c6a]20int8_t sqdebuf[50]; /* sequence data entry buffer */
[f40a309]21
22struct seqent seqbuf; /* sequence line buffer */
23
24/*
25
26*/
[7258c6a]27
[f40a309]28int8_t sqhilit[][8] = { /* submenu highlight table */
29
30 /* start, width, row1, row2, row3, row4, row5, pad */
31
32 { 2, 13, ST_0|ST_2, ST_0|ST_2, ST_0|ST_2, ST_0, 0, 0},
33 { 17, 11, ST_0|ST_2, ST_0|ST_2, ST_0|ST_2, ST_0, 0, 0},
34 { 30, 11, ST_0|ST_2, ST_0|ST_2, 0, ST_0, 0, 0},
35 { 43, 8, ST_0|ST_2, ST_0|ST_2, ST_0, ST_0, ST_0, 0},
36 { 53, 8, ST_1, ST_1, ST_1, ST_1, 0, 0},
37};
38
39struct selbox sqboxes[] = { /* selection boxes */
40
41 {CTOX(1), RTOY(DATAROW), CTOX(48)-1, RTOY(1+DATAROW)-1, 0, sqfnbox}, /* current patch */
42
43 { 0, 0, 0, 0, 0, FN_NULL}
44};
[7258c6a]45
[f40a309]46int8_t sqopreq[] = { /* action needs operand type flag table */
47
48 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 1
49};
[7258c6a]50
[f40a309]51int8_t nextact[] = { 24, 36, 6 }; /* next column after action entry */
52
53/*
54
[7258c6a]55*/
[f40a309]56
57int16_t sqidata[] = { /* intial data by box */
58
59 0x0000, /* " " 0 */
60 0x0000, /* "Kt 001 1 01" 1 */
61 0x0000, /* "Kc 001 1 01" 2 */
62 0x0000, /* "Kr 001 1 01" 3 */
63 0x0000, /* "If 001 1 01" 4 */
64 0x0000, /* "Trig on 01" 5 */
65 0x0000, /* "Trig off 01" 6 */
66 0x0000, /* "Trig tgl 01" 7 */
67 0x0000, /* "If trig 01" 8 */
68 0x0000, /* "Stop " 9 */
69 0x0000, /* "Jump to 000" 10 */
70 0x0000, /* "???????????" 11 */
71 0x0000, /* "If stim act" 12 */
72 SQ_VAL, /* "Set R01=00 " 13 */
73 SQ_VAL, /* "Inc R01+00 " 14 */
74 SQ_VAL, /* "If R01=00 " 15 */
75 SQ_VAL, /* "If R01<00 " 16 */
76 SQ_VAL /* "If R01>00 " 17 */
77};
78
79/*
[7258c6a]80
[f40a309]81*/
82
83int8_t actcol[] = { /* action data entry column by action */
84
[7258c6a]85 0, 3, 3, 3, 3, 9, 9, 9, 9, 5, 5, 5, 5, 10, 8, 3, 5
[f40a309]86};
[7258c6a]87
[f40a309]88int8_t sqvcol[] = { 9, 8, 9, 9 }; /* value entry column - type order */
[7258c6a]89
[f40a309]90int8_t seqvcol[] = { 8, 8, 9, 9, 9 }; /* value entry column - box order */
91
92int16_t sqndata[] = { /* data types in box order */
93
94 SQ_VAL, SQ_REG, SQ_VLT, SQ_RND
95};
96
97/*
98
99*/
100
101/*
102 =============================================================================
[7258c6a]103 hilitsq() -- highlight sequence submenu
[f40a309]104 =============================================================================
[7258c6a]105*/
[f40a309]106
107void hilitsq(int8_t n)
108{
109 register int16_t chr, h, v, w;
110
111 sqmenu = n; /* set current submenu type */
112
113 for (h = 0; h < 5; h++) { /* scan the columns */
114
115 for (v = 0; v < 5; v++) { /* scan the rows */
116
117 chr = sqhilit[h][0]; /* starting character */
118
119 for (w = sqhilit[h][1]; w-- > 0; )
120 vsetcv(obj11, v + 1, chr++,
121 (sqhilit[h][v + 2] & n) ?
122 PTIATR : PTMATR, 64);
123 }
124 }
125}
126
127/*
128
129*/
130
131/*
[0580615]132 =============================================================================
[f40a309]133 postcm() -- determine state after cursor motion
134 =============================================================================
135*/
136
137void postcm(void)
138{
139 if (inrange(stccol, 12, 22)) {
140
141 if (inrange(stccol, 12, 13))
142 hilitsq(ST_0);
143 else if ((sqopreq[seqbuf.seqact1 & SQ_MACT]) AND (stccol EQ 19))
144 hilitsq(ST_1);
145 else
146 hilitsq(ST_OFF);
147
148 return;
149
150 } else if (inrange(stccol, 24, 34)) {
151
152 if (inrange(stccol, 24, 25))
153 hilitsq(ST_0);
154 else if ((sqopreq[seqbuf.seqact2 & SQ_MACT]) AND (stccol EQ 31))
155 hilitsq(ST_1);
156 else
157 hilitsq(ST_OFF);
158
159 return;
160
161 } else if (inrange(stccol, 36, 46)) {
162
163 if (inrange(stccol, 36, 37))
164 hilitsq(ST_2);
165 else if ((sqopreq[seqbuf.seqact3 & SQ_MACT]) AND (stccol EQ 43))
166 hilitsq(ST_1);
167 else
168 hilitsq(ST_OFF);
169
170 return;
171
172 } else {
173
174 hilitsq(ST_OFF);
175 return;
176 }
177}
178
179/*
180
181*/
182
[7258c6a]183/*
[f40a309]184 =============================================================================
185 movestc() -- move cursor and reset highlighting
186 =============================================================================
187*/
188
189void movestc(int16_t r, int16_t c)
190{
191 ctcpos(r, c);
192 postcm();
193}
194
[7258c6a]195/*
[f40a309]196 =============================================================================
197 endssm() -- end patch submenu data entry
198 =============================================================================
199*/
200
201void endssm(int16_t row, int16_t col)
202{
203 submenu = FALSE;
204 cmtype = CT_SMTH;
205
206 mtcoff();
207 ctcon();
208 movestc(row, col);
209}
210
211/*
212
213*/
[7258c6a]214
[f40a309]215/*
216 =============================================================================
217 setsqm() -- setup submenu
218 =============================================================================
219*/
220
221void setsqm(int16_t r, int16_t c)
222{
223 submenu = TRUE;
224 cmtype = CT_MENU;
225 mtcpos(r, c);
226}
227
228/*
229
[7258c6a]230*/
[f40a309]231
[7258c6a]232/*
233 =============================================================================
234 sqenter() -- enter an action
235 =============================================================================
[f40a309]236*/
237
238int16_t sqenter(void)
239{
240 register int16_t i, lcol;
241 register int32_t ltemp;
242 register uint16_t *ap, *dp;
243 uint16_t theact, port, chan, key, val, obj, dtype;
244
245 switch (action) {
246
247 case 0:
248
249 ap = &seqbuf.seqact1;
250 dp = &seqbuf.seqdat1;
251 break;
252
253 case 1:
254
255 ap = &seqbuf.seqact2;
256 dp = &seqbuf.seqdat2;
257 break;
258
259 case 2:
260
261 ap = &seqbuf.seqact3;
262 dp = &seqbuf.seqdat3;
263 break;
264
265 default:
266
267 action = 0;
268 movestc(DATAROW, actlft[action]);
269 return(FAILURE);
270 }
271
272/*
273
274*/
275 lcol = actlft[action];
276 theact = SQ_MACT & *ap;
277
278 switch (theact) {
279
280 case SQ_TKEY: /* "Kt 001 1 01" */
281 case SQ_CKEY: /* "Kc 001 1 01" */
282 case SQ_RKEY: /* "Kr 001 1 01" */
283 case SQ_IKEY: /* "If 001 1 01" */
284
285 ltemp = 0;
286
287 for (i = lcol + 3; i < lcol + 6; i++)
288 ltemp = (ltemp * 10) + (sqdebuf[i] - '0');
289
290 if ((ltemp < 1L) OR (ltemp > 128L)) {
291
292 movestc(DATAROW, actlft[action] + 3);
293 return(FAILURE);
294 }
295
296 key = ltemp - 1;
297/*
298
299*/
300 i = sqdebuf[lcol + 7];
301
302 if ((i EQ '1') OR (i EQ '2')) {
303
304 port = i - '1';
305
306 } else if (i EQ 'L') {
307
308 port = 2;
309
310 } else {
311
312 movestc(DATAROW, actlft[action] + 7);
313 return(FAILURE);
314 }
315
316 ltemp = ((sqdebuf[lcol + 9] - '0') * 10) +
317 (sqdebuf[lcol + 10] - '0');
318
319 if ((ltemp < 1L) OR (ltemp > 16L)) {
320
321 movestc(DATAROW, actlft[action] + 9);
322 return(FAILURE);
323 }
324
325 chan = ltemp - 1;
326 *dp = (port << 11) | (chan << 7) | key;
327
328 break;
329/*
330
331*/
332 case SQ_STRG: /* "Trig on 01" */
333 case SQ_CTRG: /* "Trig off 01" */
334 case SQ_TTRG: /* "Trig tgl 01" */
335
336 ltemp = ((sqdebuf[lcol + 9] - '0') * 10)+
337 (sqdebuf[lcol + 10] - '0');
338
339 if ((ltemp < 1L) OR (ltemp > 16)) {
340
341 movestc(DATAROW, actlft[action] + 9);
342 return(FAILURE);
343 }
344
345 *dp = ltemp - 1;
346
347 break;
348
349 case SQ_NULL: /* " " */
350 case SQ_ITRG: /* "If trig act" */
351 case SQ_STOP: /* "Stop " */
352 case SQ_ISTM: /* "If stim act" */
353
354 break;
355
356 case SQ_JUMP: /* "Jump to 000" */
357
358 ltemp = 0;
359
360 for (i = lcol + 8; i < lcol + 11; i++)
361 ltemp = (ltemp * 10) + (sqdebuf[i] - '0');
362
363 *dp = ltemp;
364
365 break;
366/*
367
368*/
369 case SQ_SREG: /* "Set R01=00 " */
370 case SQ_AREG: /* "Inc R01+00 " */
371 case SQ_IREQ: /* "If R01=00 " */
372 case SQ_IRLT: /* "If R01<00 " */
373 case SQ_IRGT: /* "If R01>00 " */
374
375 dtype = *dp & SQ_MTYP;
376
377 ltemp = ((sqdebuf[lcol + 5] - '0') * 10) +
378 (sqdebuf[lcol + 6] - '0');
379
380 if ((ltemp < 1) OR (ltemp > 16)) {
381
382 movestc(DATAROW, actlft[action] + 5);
383 return(FAILURE);
384 }
385
386 obj = ltemp - 1;
387
388 switch (dtype) {
389
390 case SQ_REG: /* register */
391
392 ltemp = ((sqdebuf[lcol + 9] - '0') * 10) +
393 (sqdebuf[lcol + 10] - '0');
394
395 if ((ltemp < 1) OR (ltemp > 16)) {
396
397 movestc(DATAROW, actlft[action] + 9);
398 return(FAILURE);
399 }
400
401 val = ltemp - 1;
402 break;
403
404 case SQ_VAL: /* constant value */
405
406 val = ((sqdebuf[lcol + 8] - '0') * 10) +
407 (sqdebuf[lcol + 9] - '0');
408
409 break;
410/*
411
412*/
413 case SQ_VLT: /* control voltage */
414
415 val = (sqdebuf[lcol + 9] - '0') - 1;
416 break;
417
418 case SQ_RND: /* random value */
419
420 val = sqdebuf[lcol + 9] - '0';
421 break;
422
423 default:
424
425 movestc(DATAROW, actlft[action] + 8);
426 return(FAILURE);
427 }
428
429 if (((*ap & SQ_MACT) EQ SQ_AREG) AND
430 (sqdebuf[lcol + 7] EQ '-'))
431 val |= 0x1000;
432
433 *ap = (*ap & SQ_MACT) | (obj << 8);
434 *dp = (*dp & SQ_MTYP) | val;
435
436 break;
437
438 default:
439
440 movestc(DATAROW, actlft[action]);
441 return(FAILURE);
442 }
443/*
444
445*/
446 memcpyw(&seqtab[curslin], &seqbuf, NSEQW);
447 dsqlin(sqdebuf, curslin);
448 sqdeflg = TRUE;
[7258c6a]449 dcursq();
[f40a309]450 movestc(DATAROW, nextact[action]);
[7258c6a]451 return(SUCCESS);
452}
453
454/*
[f40a309]455
456*/
457
458/*
459 =============================================================================
460 sqfnbox() -- sequence display box hit processor
461 =============================================================================
462*/
463
464int16_t sqfnbox(int16_t n)
465{
466 int16_t act, vtype;
467 register int16_t box;
468 register int16_t i;
469 register int32_t ltemp;
470
471 if (NOT submenu) { /* SEQUENCE DATA ENTRY LINE */
472
473 if (inrange(stccol, 2, 4)) { /* Line */
474
475 ltemp = 0;
476
477 for (i = 2; i < 5; i++)
478 ltemp = (ltemp * 10) + (sqdebuf[i] - '0');
479
480 curslin = ltemp;
481 sqdeflg = FALSE;
482 dstw();
483 movestc(DATAROW, 2);
484 return(SUCCESS);
485
486 } else if (inrange(stccol, 6, 10)) { /* Time */
487
488 ltemp = 0;
489
490 for (i = 6; i < 8; i++)
491 ltemp = (ltemp * 10) + (sqdebuf[i] - '0');
492
493 for (i = 9; i < 11; i++)
494 ltemp = (ltemp * 10) + (sqdebuf[i] - '0');
495
496 seqtab[curslin].seqtime = ltemp;
497 seqbuf.seqtime = ltemp;
498 dsqlin(sqdebuf, curslin);
499 sqdeflg = TRUE;
500 dcursq();
501 movestc(DATAROW, 12);
502 return(SUCCESS);
503/*
504
505*/
506 } else if (inrange(stccol, 12, 22)) { /* Action 1 */
507
508 action = 0;
509
510 if (inrange(stccol, 12, 13)) {
511
512 setsqm(19, 2);
513 return(SUCCESS);
514
515 } else if ((sqopreq[seqbuf.seqact1 & SQ_MACT]) AND
516 (stccol EQ 19)) {
517
518 setsqm(19, 53);
519 return(SUCCESS);
520
521 } else {
522
523 return(sqenter());
524 }
525
526 } else if (inrange(stccol, 24, 34)) { /* Action 2 */
527
528 action = 1;
529
530 if (inrange(stccol, 24, 25)) {
531
532 setsqm(19, 2);
533 return(SUCCESS);
534
535 } else if ((sqopreq[seqbuf.seqact2 & SQ_MACT]) AND
536 (stccol EQ 31)) {
537
538 setsqm(19, 53);
539 return(SUCCESS);
540
541 } else {
542
543 return(sqenter());
544 }
545/*
546
547*/
548 } else if (inrange(stccol, 36, 46)) { /* Action 3 */
549
550 action = 2;
551
552 if (inrange(stccol, 36, 37)) {
553
554 setsqm(19, 2);
555 return(SUCCESS);
556
557 } else if ((sqopreq[seqbuf.seqact3 & SQ_MACT]) AND
558 (stccol EQ 43)) {
559
560 setsqm(19, 53);
561 return(SUCCESS);
562
563 } else {
564
565 return(sqenter());
566 }
567
568 } else
569 return(FAILURE);
570/*
571
572*/
573 } else { /* SUBMENU SELECTION */
574
575 /* determine the "box" we're pointing at */
576
577 if (inrange(vtccol, 2, 14))
578 box = vtcrow - 18;
579 else if (inrange(vtccol, 17, 27))
580 box = vtcrow - 14;
581 else if (inrange(vtccol, 30, 40))
582 box = vtcrow - 10;
583 else if (inrange(vtccol, 43, 50))
584 box = vtcrow - 6;
585 else if (inrange(vtccol, 53, 60))
586 box = vtcrow - 1;
587 else
588 return(FAILURE);
589/*
590
591*/
592 switch (sqmenu) { /* switch on submenu type */
593
594 case ST_0: /* Action 1 or Action 2 type */
595 case ST_2: /* Action 3 type */
596
597 if (inrange(box, 18, 21))
598 return(FAILURE);
599
600 switch (action) {
601
602 case 0: /* action 1 */
603
604 act = SQ_MACT & (seqbuf.seqact1 = sqatype[box]);
605 vtype = 0x000F & ((seqbuf.seqdat1 = sqidata[box]) >> 8);
606 break;
607
608 case 1: /* action 2 */
609
610 act = SQ_MACT & (seqbuf.seqact2 = sqatype[box]);
611 vtype = 0x000F & ((seqbuf.seqdat2 = sqidata[box]) >> 8);
612 break;
613
614 case 2: /* action 3 */
615
616 if ((box EQ 4) OR (box EQ 8) OR (box EQ 12) OR
617 inrange(box, 15, 17))
618 return(FAILURE);
619
620 act = SQ_MACT & (seqbuf.seqact3 = sqatype[box]);
621 vtype = 0x000F & ((seqbuf.seqdat3 = sqidata[box]) >> 8);
622 break;
623 }
624
625 memcpyw(&seqtab[curslin], &seqbuf, NSEQW);
626 dsqlin(sqdebuf, curslin);
627 sqdeflg = TRUE;
628 dcursq();
629
630 if (sqopreq[act])
631 endssm(stcrow, actlft[action] + sqvcol[vtype]);
632 else if ((act EQ SQ_ISTM) OR (act EQ SQ_STOP))
633 endssm(stcrow, nextact[action]);
634 else
635 endssm(stcrow, actlft[action] + actcol[act]);
636
637 return(SUCCESS);
638/*
639
640*/
641 case ST_1: /* operand type */
642
643 if (NOT inrange(box, 18, 21))
644 return(FAILURE);
645
646 switch (action) {
647
648 case 0: /* action 1 */
649
650 if (NOT sqopreq[act = SQ_MACT & seqbuf.seqact1])
651 return(FAILURE);
652
653 seqbuf.seqdat1 = (seqbuf.seqdat1 & SQ_MFLG) | sqndata[box - 18];
654 break;
655
656 case 1: /* action 2 */
657
658 if (NOT sqopreq[act = SQ_MACT & seqbuf.seqact2])
659 return(FAILURE);
660
661 seqbuf.seqdat2 = (seqbuf.seqdat2 & SQ_MFLG) | sqndata[box - 18];
662 break;
663
664 case 2: /* action 3 */
665
666 if (NOT sqopreq[act = SQ_MACT & seqbuf.seqact3])
667 return(FAILURE);
668
669 seqbuf.seqdat3 = (seqbuf.seqdat3 & SQ_MFLG) | sqndata[box - 18];
670 break;
[6262b5c]671 }
672
673 break;
674
675 default: /* -BOGUS- */
676
677 endssm(stcrow, stccol);
678 return(FAILURE);
679 }
680
681 memcpyw(&seqtab[curslin], &seqbuf, NSEQW);
682 dsqlin(sqdebuf, curslin);
683 sqdeflg = TRUE;
684 dcursq();
685 endssm(stcrow, actlft[action] + seqvcol[box - 18]);
686 return(SUCCESS);
687 }
688
689 return(FAILURE);
690}
691
Note: See TracBrowser for help on using the repository browser.