source: buchla-68k/vlib/vwputp.s@ 9bf0f86

Last change on this file since 9bf0f86 was 4f508e6, checked in by Thomas Lopatic <thomas@…>, 7 years ago

Converted assembly language files.

  • Property mode set to 100644
File size: 2.7 KB
Line 
1| ------------------------------------------------------------------------------
2| vwputp.s -- put a pixel into a 2-bit per pixel bitmap object
3| Version 2 -- 1987-04-14 -- D.N. Lynx Crowe
4| (c) Copyright 1987 -- D.N. Lynx Crowe
5| ------------------------------------------------------------------------------
6| int
7| vwputp(octad, xloc, yloc, val)
8| struct octent |octad;
9| int xloc, yloc;
10
11| Writes the pixel value 'val' into the 2-bit per pixel
12| bitmap object described by 'octad' at ('xloc','yloc').
13
14| -----
15
16| struct octent {
17
18| uint ysize,
19| xsize;
20
21| int objx,
22| objy;
23
24| uint |obase;
25
26| char opri,
27| oflags;
28
29| uint odtw0,
30| odtw1;
31| };
32
33| Upper left corner of screen is (0,0) origin.
34
35 .text
36
37 .xdef _vputp
38
39OCTAD = 8
40XLOC = 12
41YLOC = 14
42VAL = 16
43
44YSIZE = 0
45XSIZE = 2
46OBJX = 4
47OBJY = 6
48OBASE = 8
49OPRI = 12
50OFLAGS = 13
51ODTW0 = 14
52ODTW1 = 16
53
54 .page
55
56_vwputp: link a6,#0 | Link stack frames
57 movea.l OCTAD(a6),a1 | Get OCTAD base into a1
58 move.w XLOC(a6),d0 | Get XLOC into d0
59 cmp.w XSIZE(a1),d0 | Check XLOC range
60 bge vputerr | ERROR if too large
61
62 tst.w d0 | Check XLOC sign
63 bmi vputerr | ERROR if negative
64
65 move.w YLOC(a6),d1 | Get YLOC into d1 to test
66 cmp.w YSIZE(a1),d1 | Check YLOC range
67 bge vputerr | ERROR if too large
68
69 tst.w d1 | Check YLOC sign
70 bmi vputerr | ERROR if negative
71
72 lsr.w #3,d0 | Divide XLOC by 8
73 move.w XSIZE(a1),d1 | Get width into d1
74 lsr.w #3,d1 | Divide width by 8
75 mulu YLOC(a6),d1 | Multiply width/8 by YLOC
76 ext.l d0 | Extend XLOC/8 to a long
77 add.l d0,d1 | ... and add it to d1
78 add.l OBASE(a1),d1 | Add OBASE to d1
79 movea.l d1,a0 | Make a0 point at bitmap data
80 move.w XLOC(a6),d0 | Get XLOC
81 andi.l #0x07,d0 | Mask to low 3 bits
82 add.l d0,d0 | Multiply by 2 for word index
83 move.l d0,d1 | Save index in d1
84 add.l #MTAB,d0 | Add mask table base
85 movea.l d0,a2 | a2 points at mask
86 add.l #STAB,d1 | Add shift table base to index
87 move.l d1,a1 | a1 points at shift count
88 move.w (a1),d0 | Get shift count in d0
89 move.w VAL(a6),d1 | Get new pixel in d1
90 andi.w #0x03,d1 | Mask down to 2 bits
91 lsl.w d0,d1 | Shift into position for OR
92 move.w (a0),d0 | Get old bitmap word in d0
93 and.w (a2),d0 | Mask out old pixel
94 or.w d1,d0 | OR in new pixel
95 move.w d0,(a0) | Store updated word in bitmap
96 clr.l d0 | Set return value = 0 = OK
97
98vputexit: unlk a6 | Unlink stack frame
99 rts | Return to caller
100
101vputerr: moveq.l #-1,d0 | Set return value = -1 = ERROR
102 bra vputexit | Go unlink stack and return
103
104MTAB: dc.w 0xFFFC,0xFFF3,0xFFCF,0xFF3F | Mask table
105 dc.w 0xFCFF,0xF3FF,0xCFFF,0x3FFF
106STAB: dc.w 0,2,4,6,8,10,12,14 | Shift table
107
108 .end
Note: See TracBrowser for help on using the repository browser.